Get CollegeDekho
Mobile App
 Live Help
 0141-3990699
Login
Signup
Institutes
Courses & Exams
News & Articles

Aligarh Muslim University Entrance Exam (M. Tech) - PE Petroleum Engineering Exam Pattern

Exam Pattern

Aligarh Muslim University (AMU) Competitive Entrance Exam (M.Tech) - PE Petroleum Engineering follows GATE Exam pattern 

The exam will be conducted by an ONLINE Computer Based Test (CBT). In all the papers, there will be a total of 65 questions carrying 100 marks, out of which 10 questions carrying a total of 15 marks are in General Aptitude (GA). In AMU- PE Petroleum Engineering the Engineering Mathematics will carry around 15% of the total marks, the General Aptitude section will carry 15% of the total marks and the remaining 70% percentage of the total marks is devoted to the subject of the paper.

Multiple Choice Questions (MCQ) carrying 1 or 2 marks each in all papers and sections. These questions are objective in nature, and each will have a choice of four answers, out of which the candidate has to mark the correct answer(s).

Numerical Answer Questions of 1 or 2 marks each in all papers and sections. For these questions the answer is a real number, to be entered by the candidate using the virtual keypad. No choices will be shown for this type of questions.

General Aptitude (GA) Questions

In all papers, GA questions carry a total of 15 marks. The GA section includes 5 questions carrying 1 mark each (sub-total 5 marks) and 5 questions carrying 2 marks each (sub-total 10 marks).

Engineering Mathematics and Subject Knowledge

These papers would contain 25 questions carrying 1 mark each (sub-total 25 marks) and 30 questions carrying 2 marks each (sub-total 60 marks).  

Note on Negative Marking for Wrong Answers

For a wrong answer chosen for the multiple choice questions, there would be negative marking. For 1-mark multiple-choice questions, 1/3 mark will be deducted for a wrong answer. Likewise, for 2-mark multiple-choice questions, 2/3 mark will be deducted for a wrong answer. However, there is no negative marking for a wrong answer in numerical answer type questions.

Test duration- 3 hours

Marking System – For 1-mark multiple-choice questions, 1/3 mark will be deducted for a wrong answer. Likewise, for 2-marks multiple-choice questions, 2/3 mark will be deducted for a wrong answer. There is no negative marking for numerical answer type questions.

Syllabus Summary

No. Of Subject 12
No. Of Unit 23
No. Of Chapter 129
Chapters
  1. Offshore oil and gas operations & ocean environment
  2. Offshore fixed platforms
  3. Offshore drilling
  4. Use of conductors and risers
  5. Offshore well completion
  6. Deep water applications
Chapters
  1. Oil processing platforms
  2. SPM and SBM transportation and utilities
  3. Deep water drilling rig
  4. Deep water production system
  5. Emerging deep water technologies
Chapters
  1. Classification and description of some common rocks
  2. Origin, migration and accumulation of Petroleum
  3. Petroleum exploration methods
Chapters
  1. Well equipments
  2. Well completion techniques
  3. Well production problems and mitigation
  4. Well servicing & Workover operations
  5. Workover & completion fluids
  6. Formation damage
  7. Well stimulation techniques
  8. Artificial lift techniques
  9. Field processing of oil & gas
  10. Storage and transportation of petroleum and petroleum products
  11. Metering and measurements oil & gas
  12. Production system analysis & optimization
  13. Production testing
  14. Nodal system analysis
Chapters
  1. Environment concepts
  2. The impact of drilling
  3. Production operations on environment
  4. Environmental transport of petroleum wastes
  5. Offshore environmental studies
  6. Offshore oil spill and oil spill control
  7. Waste treatment methods
Chapters
  1. Manual & automatic shutdown system
  2. blow down systems
  3. Gas detection system
  4. Fire detection and suppression systems
  5. Personal protection system & measures
  6. HSE Policies
  7. Disaster & crisis management in Petroleum Industry
Chapters
  1. Toxicity, Physiological, Asphyxiation
  2. Respiratory and skin effect of petroleum hydrocarbons
Chapters
  1. Coal bed methane, shale gas
  2. Oil shale, gas hydrate, and heavy oil
Chapters
  1. Well Planning
  2. Drilling method
  3. Rig operating systems
  4. Drilling fluids function and properties
  5. Drilling fluid maintenance equipment
  6. Oil & gas well cementing operations
  7. Drill bit types and their applications
  8. Drill string & Casing string function
  9. Drilling problems, their control & remedies
  10. Directional drilling tools
  11. Directional survey
Chapters
  1. Basic principles and mechanism of EOR
  2. Concept of pattern flooding
  3. Macroscopic and microscopic displacement efficiency
Chapters
  1. Chemical flooding, Miscible flooding
  2. Thermal recoveries
  3. Microbial EOR
Chapters
  1. Petrophysical properties of reservoir rocks
  2. Coring and core analysis
  3. Reservoir fluid properties
  4. Phase behavior of hydrocarbon system
  5. Flow of fluids through porous media
  6. Water and gas coning
  7. Reservoir pressure measurements
  8. Reservoir drives
  9. Reserve estimation & techniques
Chapters
  1. Limits, continuity and differentiability
  2. Partial Derivatives
  3. Maxima and Minima
  4. Sequences and Series
  5. Tests for Convergence
  6. Fourier Series
  7. Gauss And Green
Chapters
  1. Linear And Non-Linear First Order Odes
  2. Higher Order Linear Odes
  3. Cauchy’s And Euler’s Equations
  4. Laplace transforms
  5. Pdes –Laplace
Chapters
  1. Matrix Algebra
  2. Systems of Linear Equations
  3. Eigen values and eigen vectors.
Chapters
  1. Solutions Of Linear And Non-Linear Algebraic Equations
  2. Integration Of Trapezoidal And Simpson’s Rule
  3. Single And Multi-Step Methods For Differential Equations
Chapters
  1. Definitions of probability and sampling theorems
  2. Conditional probability
  3. Mean, median, mode and standard deviation
  4. Random Variables
  5. Poisson, Normal And Binomial Distributions
  6. Correlation And Regression Analysis
Chapters
  1. Complex number
  2. Polar Form Of Complex Number
  3. Triangle Inequality
Chapters
  1. Numerical computation
  2. Numerical Estimation
  3. Numerical Reasoning
  4. Data Interpretation
Chapters
  1. English grammar
  2. Sentence Completion
  3. Verbal Analogies
  4. Word Groups
  5. Instructions
  6. Critical Reasoning
  7. Verbal Deduction
Chapters
  1. Diffusivity equation, derivation & solutions
  2. Radius of investigation
  3. Principle of superposition
  4. Horner’s approximation
  5. Drill Stem Testing
Chapters
  1. Drawdown and build up-test analysis
  2. Wellbore effects
  3. Multilayer reservoirs
  4. Injection well testing
  5. Multiple well testing
  6. Interference testing
  7. Gas well testing
Chapters
  1. Evaluation of CBL/VDL, USIT, SFT, RFT
  2. Production logging tools
  3. Special type of logging tools
  4. Casing inspection tools
  5. Formations micro scanner (FMS)
  6. Standard log interpretation methods
  7. Cross-plotting methods

How to prepare

Preparation Strategy

Make a proper Time Table

It is very important that you make a time table and stick to it and you will have an exact idea of what you are required to study and the time required for it.

Concept clarity rather than rote learning

It is essential that you have a clear idea of the formulas and concepts rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you clear your basis and concepts before moving on.

Prepare Notes

It is very important make small notes or a comprehensive list of formulas on each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.

Revision of Class XI and XII concepts

Make sure that you revise your concepts from the syllabus of these classes before starting anything new as most of the engineering exams will be for admission to undergraduate courses and so the syllabi from class XI and XII becomes the testing ground to check students.

Seek guidance

It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.

Sample Papers

Even though there may be a complete change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint.

Mock tests

The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank

Time management

Time management can be learned through thorough practice and regular test taking. So it is important that you practice it and practice it well.

Negative marking

Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.

Duration : 2 Hours

Important Instructions

The candidate who applies for admission is advised to carefully read the same and it shall be presumed that he/she agrees to abide by the same. 1. Admissions to all courses of study as detailed in this Guide are open to Indian Nationals only. Candidates having other nationalities should refer to the relevant Guide for them. 2. The intake to all courses of study as detailed in this Guide, except those specifically mentioned for AMU Centres at Malappuram, Murshidabad and/or Kishanganj, implies intake at Aligarh Muslim University, Aligarh only. However, the intake may change with the approval of the competent authority. 3. The University reserves the right not to admit any candidate to a course of study even though a notification inviting applications for admission to the same has been issued. 4. The candidate shall not be entitled to claim admission as a matter of right even if he/she is otherwise eligible. The University reserves the right to refuse admission to any individual without assigning any reason. 5. Canvassing in any manner for securing admission shall render a candidate disqualified. 6. Eligibility rules as specified for each course shall be strictly followed and shall not be relaxed under any circumstance. Candidate should satisfy himself/herself that he/she fulfills the eligibility requirements prescribed for admission to the concerned course of study. 7. A candidate shall be eligible to apply for admission to a course of study if he/she has passed the qualifying examination and also fulfills all other eligibility requirements in terms of subjects studied, percentage of marks, age, etc. The percentage of marks secured by a candidate at the qualifying examination, falling short by even a decimal fraction shall not be rounded off to the next whole number. Similarly, if the age falls short or exceeds even by a single day, the candidate shall not be eligible for admission. 8. Candidates awaiting result of qualifying examination may also apply for admission with the clear stipulation that in the event of their selection they will be entitled to admission only if they fulfill all eligibility requirements of concerned course of study at the time of admission. 9. Physically challenged candidates are provided a relaxation in age up to a maximum of five years in admission to courses which prescribe a maximum age limit, except for those courses where such limits are prescribed by statutory/regulatory councils governing such admissions. 10. Changes, if any, made in the Admission Rules and/or in the eligibility criteria from time to time, shall be applicable to candidates seeking admission in the University even after notification.