### Bharath Graduate Engineering Entrance Test (BGEET)- M.Tech - Automobile Engineering Exam Pattern

#### Exam Pattern

The **Bharath ****Graduate**** ****Engineering Entrance ****Test** **(BGEET) M.Tech - Automobile Engineering **is Multiple Choice Question type paper, the questions are based on the subjects and topics of the respective discipline in B.Tech level. The paper pattern largely follows that of **GATE** exam pattern.

**Related to Respective discipline in B.Tech level**

**Test Duration-**** ** 3 Hours

**Total Marks -** 100

**Marking System – **No negative marking for the wrong answer.

### Syllabus Summary

No. Of Subject | 5 |
---|---|

No. Of Unit | 25 |

No. Of Chapter | 131 |

- Stress and strain
- Poisson's ratio
- Mohr’s circle for plane stress and plane strain
- Thin cylinders
- Shear force and bending moment
- Torsion of circular shafts
- Euler’s theory of columns
- Energy methods
- Thermal stresses
- Strain Gauges and rosettes
- Testing of materials with universal testing machine
- Testing of hardness and impact strength

- Design for static and dynamic loading
- Failure theories
- Fatigue strength and the S-N diagram
- Rolling and sliding contact bearings, brakes and clutches

- Displacement, velocity and acceleration analysis
- Dynamic analysis of linkages
- Flywheels and governors
- Balancing of reciprocating and rotating masses
- Gyroscope

- Free and forced vibration
- Effect of damping
- Resonance
- Critical speeds of shafts

- Free-body diagrams and equilibrium
- Trusses and frames
- Virtual work
- Kinematics and dynamics of particles and of rigid bodies
- Impulse and momentum
- Energy formulations, Collisions

- Basic concepts of CAD/CAM
- Integration tools

- Deterministic model
- Safety stock inventory control systems

- Limits, fits and tolerances
- Linear and angular Measurements
- Interferometry
- Alignment and testing methods
- Tolerance analysis

- Forecasting models
- Aggregate production planning, scheduling

- Mechanics of machining
- Basic machine Tools
- Single and multi-point cutting tools
- Economics of machining
- Principles of non-traditional machining processes

- Different types of castings
- Solidification and cooling
- Plastic deformation and yield criteria
- Load estimation for bulk and sheet
- Principles of powder Metallurgy

- Structure and properties of engineering materials
- Phase Diagrams
- Stress-strain diagrams for engineering materials

- Linear programming, simplex method
- Network flow models
- Simple queuing models

- Functions of single variable
- Limits, continuity and differentiability
- Mean value theorem
- Chain rule
- Partial Derivatives
- Maxima and Minima
- Gradient
- Divergence and curl
- Directional derivatives
- Integration
- Theorems Of Stokes
- Gauss And Green
- Fourier Series

- First order linear and nonlinear differential equations
- Higher Order Linear Odes
- Partial differential equations
- Numerical methods for linear and nonlinear algebraic equations
- Numerical integration and differentiation
- Laplace transforms

- Matrix Algebra
- Systems of Linear Equations
- Eigenvalues and Eigenvectors

- Numerical solutions of linear and non-linear algebraic equations
- Integration by trapezoidal and Simpson’s rule
- Single And Multi-Step Methods For Differential Equations

- Conditional probability
- Mean, median, mode and standard deviation
- Random Variables
- Definitions of probability
- Binomial, Poisson and normal distributions

- Taylor Series, Laurent Series
- Analytic functions
- Cauchy-Riemann equations
- Cauchy’s integral theorem and integral formula

- Thermodynamic systems and processes
- Properties of pure Substances
- Zeroth and first laws of Thermodynamics
- Second law of Thermodynamics
- Thermodynamic property charts and tables
- Thermodynamic relations

- Modes of heat transfer
- One dimensional heat conduction, resistance concept
- Unsteady heat conduction
- Heisler's charts
- Effect of turbulence
- Heat Exchanger performance
- LMTD and NTU method
- Stefan- Boltzmann law
- Wien's displacement law, black and grey surfaces

- Fluid properties
- Fluid statics, manometry, buoyancy
- Control-volume analysis
- Differential Equations of continuity and momentum
- Bernoulli’s equation
- Dimensional analysis
- Viscous flow of incompressible fluids
- Elementary turbulent flow

- Air and gas compressors
- I.C. Engines
- Refrigeration and air-conditioning
- Turbomachinery
- Pelton-wheel, Francis and Kaplan turbines

- Numerical computation
- Numerical Estimation
- Numerical Reasoning
- Data Interpretation

- English grammar
- Sentence Completion
- Verbal Analogies
- Word Groups
- Instructions
- Critical Reasoning
- Verbal Deduction

#### How to prepare

**Preparation Strategy**

**Make a proper Time Table**

It is very important that you ** make a timetable and stick to it** and you will have an exact idea of what you are required to study and the time required for it.

**Concept clarity rather than rotes learning**

It is essential that you have a clear idea of the ** formulas and concepts** rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you

**before moving on.**

**clear your basis and concepts****Prepare Notes**

It is very important to ** make small notes** or a

**each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.**

**comprehensive list of formulas on****Revision of Class XI and XII concepts**

Make sure that you ** revise your concepts from the syllabus** of these classes before starting anything new as most of the engineering exams will be for admission to postgraduate courses and so the

**becomes the testing ground to check students.**

**syllabi from B.Tech****Seek guidance**

It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.

**Sample Papers**

Even though there may be a complete change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint.

**Mock tests**

The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank

**Time management**

Time management can be learned through thorough practice and regular test taking. So it is important that you practice it and practice it well.

**Negative marking**

Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.

**Duration :**3 Hours

#### Important Instructions

The provision of this reservation will be applicable in government as well as non-government aided institutions. The candidates, who are aspiring to get seats under Disabled Quota, should apply expressing their claims for the same along with the valid disability certificate. The candidate, seeking the benefit for reservation under Disabled Quota, should present him/herself before a medical board comprising of atleast one expert / specialist from the speciality of orthopaedics from state medical board in the state of Bihar and obtain a valid disability certificate from the medical board by claiming the benefit of reservation. The disability certificate of the candidate from a medical board shall (i) Give a permanent disability certificate where there are no chances of variation in the degree of disability (ii) Indicate the period of validity in the certificate, in cases where there is any chance of variation in the degree of disability. In case, there are not enough number of Candidates, who qualify themselves for admission against reserved seats under Disabled Quota of any category, the consequent vacant seats should be merged with the seats of respective category.