### Bharath Graduate Engineering Entrance Test (BGEET)- M.Tech - Bio-Medical Engineering Exam Pattern

#### Exam Pattern

The **Bharath ****Graduate**** ****Engineering Entrance ****Test** **(BGEET) M.Tech - Bio-Medical Engineering **is Multiple Choice Question type paper, the questions are based on the subjects and topics of the respective discipline in B.Tech level. The paper pattern largely follows that of **GATE** exam pattern.

**Related to Respective discipline in B.Tech level**

**Test Duration-**** ** 3 Hours

**Total Marks -** 100

**Marking System – **No negative marking for the wrong answer.

### Syllabus Summary

No. Of Subject | 9 |
---|---|

No. Of Unit | 31 |

No. Of Chapter | 119 |

- Sample and Hold Circuits
- ADCs and DACs

- Latches and flip-flops
- Finite State Machines

- Boolean Algebra
- Boolean Identities and Karnaugh map

- ROM
- SRAM
- DRAM

- Architecture
- Programming
- I/O Interfacing

- Basic Control System Component
- Block Diagram Representation
- Frequency Response
- Routh-Hurwitz and Nyquist criteria
- Lag, Lead and Lead-Lag Compensators

- Fourier series and Fourier transform representations
- Sampling Theorem and Applications
- Discrete-time Signals
- LTI systems

- Nodal and Mesh Analysis
- Network Theorems
- Wye-Delta Transformation
- Steady State Sinusoidal Analysis
- Time Domain Analysis
- Solution of Network Equations
- Frequency Domain Analysis
- Linear 2-Port Network Parameters
- State Equations for Networks

- Antenna Types
- Antenna Arrays
- Basics of Radar
- Light Propagation In Optical Fibers

- Differential and Integral Forms
- Wave Equation
- Poynting vector

- Reflection and Refraction
- Propagation through Various Media
- Transmission Line

- Modes
- Boundary Conditions
- Dispersion Relations

- Energy bands in Intrinsic and Extrinsic Silicon

- Generation and Recombination of Carriers
- Poisson and Continuity Equations
- P-N junction, Zener Diode
- Integrated Circuit Fabrication Process

- Biasing, Bias Stability
- Frequency Response
- BJT and MOSFET

- Clipping, Clamping
- Rectifiers

- Simple op-amp circuits
- Sinusoidal oscillators
- Function generators
- Voltage reference circuits
- Power supplies

- Small Signal Equivalent Circuits

- PCM, DPCM, Digital Modulation Scheme
- SNR and BER for Digital Modulation
- Hamming Codes
- Timing and frequency Synchronization
- Basics of TDMA, FDMA and CDMA

- Amplitude Modulation and Demodulation
- Spectra of AM and FM
- Circuits for Analog Communications

- Entropy, Mutual Information
- Channel Capacity Theorem

- Autocorrelation and Power Spectral Density
- Properties of White Noise
- Filtering of Random Signals

- Mean value theorem
- Chain rule
- Partial Derivatives
- Maxima and Minima
- Gradient
- Divergence and curl
- Directional derivatives
- Integration

- First order linear and nonlinear differential equations
- Higher Order Linear Odes
- Partial differential equations
- Laplace transforms
- Numerical methods for linear and nonlinear algebraic equations
- Numerical integration and differentiation

- Analytic Functions
- Cauchy's Integral Theorem
- Cauchy's Integral Formula
- Taylor's and Laurent's series
- Residue Theorem

- Vectors in Plane and space
- Vector Operations
- Gauss's, Green's and Stoke's Theorems

- Vector Space
- Linear Dependence and Independence
- Matrix Algebra
- Eigenvalues and Eigenvectors
- Solution of Linear Equations

- Sampling theorems
- Conditional probability
- Mean, Median, Mode
- Poisson distribution
- Binomial distribution
- Regression analysis

- Solution of nonlinear equations
- Methods for Differential Equations
- Convergence Criteria

- Numerical computation
- Numerical Estimation
- Numerical Reasoning
- Data Interpretation

- English grammar
- Sentence Completion
- Verbal Analogies
- Word Groups
- Instructions
- Critical Reasoning
- Verbal Deduction

#### How to prepare

**Preparation Strategy**

**Make a proper Time Table**

It is very important that you ** make a timetable and stick to it** and you will have an exact idea of what you are required to study and the time required for it.

**Concept clarity rather than rotes learning**

It is essential that you have a clear idea of the ** formulas and concepts** rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you

**before moving on.**

**clear your basis and concepts****Prepare Notes**

It is very important to ** make small notes** or a

**each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.**

**comprehensive list of formulas on****Revision of Class XI and XII concepts**

Make sure that you ** revise your concepts from the syllabus** of these classes before starting anything new as most of the engineering exams will be for admission to postgraduate courses and so the

**becomes the testing ground to check students.**

**syllabi from B.Tech****Seek guidance**

It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.

**Sample Papers**

Even though there may be a complete change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint.

**Mock tests**

The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank

**Time management**

Time management can be learned through thorough practice and regular test taking. So it is important that you practice it and practice it well.

**Negative marking**

Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.

**Duration :**3 Hours

#### Important Instructions

The provision of this reservation will be applicable in government as well as non-government aided institutions. The candidates, who are aspiring to get seats under Disabled Quota, should apply expressing their claims for the same along with the valid disability certificate. The candidate, seeking the benefit for reservation under Disabled Quota, should present him/herself before a medical board comprising of atleast one expert / specialist from the speciality of orthopaedics from state medical board in the state of Bihar and obtain a valid disability certificate from the medical board by claiming the benefit of reservation. The disability certificate of the candidate from a medical board shall (i) Give a permanent disability certificate where there are no chances of variation in the degree of disability (ii) Indicate the period of validity in the certificate, in cases where there is any chance of variation in the degree of disability. In case, there are not enough number of Candidates, who qualify themselves for admission against reserved seats under Disabled Quota of any category, the consequent vacant seats should be merged with the seats of respective category.