GATE-PE:Petroleum Engineering Exam Pattern
Graduate Aptitude Test in Engineering (GATE) -PE: Petroleum Engineering has 3 hours duration.
The question paper will consist of both Multiple choice questions (MCQ) and Numerical answer type (NAT) questions.
In all the papers, there will be a total of 65 questions carrying 100 marks, out of which 10 questions carrying a total of 15 marks will be on General Aptitude (GA).
Graduate Aptitude Test in Engineering (GATE) -PE: Petroleum Engineering would contain questions of two different types in various papers:
- Multiple Choice Questions (MCQ) carrying 1 or 2 marks each in all papers and sections. These questions are objective in nature, and each will have a choice of four answers, out of which the candidate has to mark the correct answer(s).
- Numerical Answer Questions of 1 or 2 marks each in all papers and sections. For these questions the answer is a real number, to be entered by the candidate using the virtual keypad. No choices will be shown for this type of questions. The answer can be a number such as 10 (an integer only).
- General Aptitude (GA) Questions
- In all papers, GA questions carry a total of 15 marks. The GA section includes 5 questions carrying 1-mark each (sub-total 5 marks) and 5 questions carrying 2-marks each (sub-total 10 marks).
|Paper||General Aptitude (GA) Questions||Subject Marks||Total Marks||Total Time|
|PE: Petroleum Engineering||15||85||100||3 hours|
Test duration- 3 hours
Total Marks- 15+85= 100
Total Question- 65
Marking System –
- For 1-mark multiple-choice questions, 1/3 mark will be deducted for a wrong answer.
- Likewise, for 2-mark multiple-choice questions, 2/3 mark will be deducted for a wrong answer.
- There is NO negative marking for numerical answer type questions.
|No. Of Subject||12|
|No. Of Unit||23|
|No. Of Chapter||129|
- Offshore oil and gas operations & ocean environment
- Offshore fixed platforms
- Offshore drilling
- Use of conductors and risers
- Offshore well completion
- Deep water applications
- Oil processing platforms
- SPM and SBM transportation and utilities
- Deep water drilling rig
- Deep water production system
- Emerging deep water technologies
- Well equipments
- Well completion techniques
- Well production problems and mitigation
- Well servicing & Workover operations
- Workover & completion fluids
- Formation damage
- Well stimulation techniques
- Artificial lift techniques
- Field processing of oil & gas
- Storage and transportation of petroleum and petroleum products
- Metering and measurements oil & gas
- Production system analysis & optimization
- Production testing
- Nodal system analysis
- Environment concepts
- The impact of drilling
- Production operations on environment
- Environmental transport of petroleum wastes
- Offshore environmental studies
- Offshore oil spill and oil spill control
- Waste treatment methods
- Manual & automatic shutdown system
- blow down systems
- Gas detection system
- Fire detection and suppression systems
- Personal protection system & measures
- HSE Policies
- Disaster & crisis management in Petroleum Industry
- Toxicity, Physiological, Asphyxiation
- Respiratory and skin effect of petroleum hydrocarbons
- Well Planning
- Drilling method
- Rig operating systems
- Drilling fluids function and properties
- Drilling fluid maintenance equipment
- Oil & gas well cementing operations
- Drill bit types and their applications
- Drill string & Casing string function
- Drilling problems, their control & remedies
- Directional drilling tools
- Directional survey
- Petrophysical properties of reservoir rocks
- Coring and core analysis
- Reservoir fluid properties
- Phase behavior of hydrocarbon system
- Flow of fluids through porous media
- Water and gas coning
- Reservoir pressure measurements
- Reservoir drives
- Reserve estimation & techniques
- Limits, continuity and differentiability
- Partial Derivatives
- Maxima and Minima
- Sequences and Series
- Tests for Convergence
- Fourier Series
- Gauss And Green
- Linear And Non-Linear First Order Odes
- Higher Order Linear Odes
- Cauchy’s And Euler’s Equations
- Laplace transforms
- Pdes –Laplace
- Matrix Algebra
- Systems of Linear Equations
- Eigen values and eigen vectors.
- Solutions Of Linear And Non-Linear Algebraic Equations
- Integration Of Trapezoidal And Simpson’s Rule
- Single And Multi-Step Methods For Differential Equations
- Definitions of probability and sampling theorems
- Conditional probability
- Mean, median, mode and standard deviation
- Random Variables
- Poisson, Normal And Binomial Distributions
- Correlation And Regression Analysis
- Complex number
- Polar Form Of Complex Number
- Triangle Inequality
- Diffusivity equation, derivation & solutions
- Radius of investigation
- Principle of superposition
- Horner’s approximation
- Drill Stem Testing
- Drawdown and build up-test analysis
- Wellbore effects
- Multilayer reservoirs
- Injection well testing
- Multiple well testing
- Interference testing
- Gas well testing
- Evaluation of CBL/VDL, USIT, SFT, RFT
- Production logging tools
- Special type of logging tools
- Casing inspection tools
- Formations micro scanner (FMS)
- Standard log interpretation methods
- Cross-plotting methods
How to prepare
Make a proper Time Table
It is very important that you make a time table and stick to it and you will have an exact idea of what you are required to study and the time required for it.
Concept clarity rather than rote learning
It is essential that you have a clear idea of the formulas and concepts rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you clear your basis and concepts before moving on.
It is very important make small notes or a comprehensive list of formulas on each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.
It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.
Even though there may be a complete change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint.
The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank
Time management can be learnt through thorough practice and regular test taking. So it is important that you practice it and practice it well.
Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.
Filling in Application Online 1. GOAPS: GATE Online Application Processing System (GOAPS website) has the web address http://appsgate.iisc.ernet.in It can also be accessed from the website of the respective Zonal GATE Offices or from the website of the GATE 2016 Organizing Institute. 2. Registration: A candidate must first register by providing a valid email address, mobile number and a GOAPS password. All communications from the GATE Offices will be sent to this email address (ONLY ONE PERSON CAN REGISTER WITH ONE e-mail ADDRESS). Give your personal mobile number because most of the communications may also be sent via SMS. GOAPS Password: The candidate chooses a password during Enrollment at GOAPS. This password must be remembered along with the GOAPS Enrolment ID to login to GOAPS. It is strongly encouraged to choose a password that cannot be guessed easily (it should not be the candidate’s name, date of birth, or some easily guessable string of numbers or letters like 12345 or abcd). 3. GOAPS Enrollment ID: Upon registration, an email containing the GOAPS Enrolment ID will be sent to the candidate. 4. Data Requirement for Application Filling: The following data will be required while filling the form at GOAPS. a) Personal information (name, date of birth, your personal mobile number, parents’ name, parents’ mobile number, etc.). b) Address for Communication (including PIN code), c) Eligibility degree details 13 d) College address, PIN code of college, e) GATE paper, choice of GATE examination cities, f) High quality image of your photograph conforming to the requirements specified in along with what type of photograph is accepted . g) Good quality image of your signature conforming to the requirements specified in h) Scanned copy of Degree Certificate or Certificate from Principal/HODs in pdf format. i) Scanned copy of Category/PwD Certificate (if applicable) in pdf format. j) Details of a valid ID Proof that you will carry to the examination hall. k) Your net-banking details. 5. Application Filling: The GOAPS allows you to enter data, “Save” partially filled form, “Logout”, and resume filling in by logging in again. The GOAPS portal is self-explanatory and user-friendly. Online help about using GOAPS is also available. 6. Before you make the payment, you will be shown a “Preview” of your application, where you have to carefully check for any errors. 7. Once you press “Confirm and Final Submit” button, no further changes to the application can be made by you. 8. For online payment follow the instructions given in Section for payment options. 9. Problems in Login into GOAPS –In case of forgotten user ID or password, follow instructions on the GOPAS portal to retrieve them.