Get CollegeDekho
Mobile App
 Live Help
 0141-3990699
Login
Signup
Institutes
Courses & Exams
News & Articles

SAAT- M.Tech - Civil Engineering Exam Pattern

Exam Pattern

The SAAT - M.Tech in Civil Engineering entrance exam question paper shall be of multiple choices. Exam questions will be according to the respective branch/discipline in the B.Tech degree.

Total Question- 120

Total Marks - 120 x 4 = 480 marks

Test duration- 2 Hours

Marking System –

  • Each correct answer shall carry four marks whereas each incorrect answer will lead to deduction of one mark.
  • Each unanswered question will carry zero marks.
  • If more than one circle is darkened for one question, it will be treated as an incorrect answer and one mark will be deducted.

Syllabus Summary

No. Of Subject 7
No. Of Unit 26
No. Of Chapter 119
Chapters
  1. Highway materials
  2. Design of bituminous paving mixes
  3. Design of flexible pavement
  4. Design of rigid pavements
  5. Distresses in concrete pavements
Chapters
  1. Geometric Design of Highways
  2. Geometric design of railway track
  3. Airport runway length
Chapters
  1. Traffic studies on flow, speed, travel time
  2. Microscopic and macroscopic parameters
  3. Webster’s method
  4. Types of intersections and channelization
Chapters
  1. Principles of surveying
  2. Maps
  3. Levelling and trigonometric levelling
  4. Photogrammetry
  5. Remote sensing
  6. Geographical information system (GIS)
  7. Geographical Positioning system (GPS)
Chapters
  1. Sub-surface investigations
  2. Earth pressure theories
  3. Stability of slopes
  4. Boussinesq’s and Westergaard’s theories
  5. Shallow foundations
  6. Terzaghi’s and Meyerhoff’s bearing capacity Theories
  7. Deep foundations
Chapters
  1. Origin of soils, soil structure and fabric
  2. Permeability
  3. Darcy’s law
  4. Principle of effective stress
  5. Mohr’s circle
Chapters
  1. Working stress
  2. Design of beams
  3. Bond and development length
  4. Prestressed concrete
Chapters
  1. Bending moment and shear force
  2. Theories of failures
  3. Simple bending theory
  4. Uniform torsion, buckling of column
Chapters
  1. Design of tension and compression
  2. Connections - simple and eccentric
  3. Plastic analysis of beams and frames
Chapters
  1. Equilibrium equations
  2. Internal forces in structures
  3. Kinematics
  4. Euler’s equations of motion
  5. Energy methods
Chapters
  1. Construction Materials
  2. Concrete
  3. Bricks and mortar
  4. Construction Management
  5. Cost estimation
  6. Project planning and network Analysis - PERT and CPM
Chapters
  1. Statically determinate and indeterminate structures
  2. Method of superposition
  3. Displacement methods
  4. Influence lines
Chapters
  1. Functions of single variable
  2. Limits, continuity and differentiability
  3. Mean value theorem
  4. Chain rule
  5. Partial Derivatives
  6. Maxima and Minima
  7. Gradient
  8. Divergence and curl
  9. Directional derivatives
  10. Integration
  11. Theorems Of Stokes
  12. Gauss And Green
  13. Fourier Series
Chapters
  1. Vector algebra
  2. Matrix Algebra
  3. Systems of Linear Equations
  4. Rank of a matrix
  5. Eigenvalues and Eigenvectors
Chapters
  1. First order equations
  2. Higher order linear equations
  3. Euler-Cauchy equations
  4. Laplace transform
  5. Initial and boundary value problems
Chapters
  1. Fourier series
  2. Solutions of one- dimensional diffusion equation
  3. First and second order one-dimensional wave equation
  4. Two-dimensional Laplace equation
Chapters
  1. Definitions of probability and sampling theorems
  2. Discrete Random variables
  3. Continuous random variables
  4. Descriptive statistics
  5. Hypothesis testing
Chapters
  1. Accuracy and precision
  2. Numerical solutions of linear and non-linear algebraic equations
  3. Newton’s and Lagrange polynomials
  4. Integration by trapezoidal and Simpson’s rule
Chapters
  1. Hydrologic cycle
  2. Hydrograph Analysis
  3. Ground water Hydrology
  4. Application of Darcy’s law
Chapters
  1. Crop water requirements
  2. Types of irrigation systems
  3. Water logging and drainage
Chapters
  1. Forces on immersed bodies
  2. Dimensional analysis and hydraulic similitude
  3. Kinematics
  4. Basics of Hydraulic Machines
  5. Channel Hydraulics
Chapters
  1. Properties of fluids, fluid statics
  2. Laminar and turbulent flow
  3. Concept of Boundary Layer
Chapters
  1. Drinking water standards
  2. Sewage and sewerage treatment
  3. Primary, secondary and tertiary treatment of wastewater
  4. Domestic wastewater treatment
Chapters
  1. Impacts of noise
  2. Measurement of noise
  3. Control of noise pollution
Chapters
  1. Transportation of solid wastes
  2. Engineered systems for solid waste management
Chapters
  1. Types of pollutants
  2. Air pollution meteorology

How to prepare

Preparation Strategy

Make a proper Time Table

It is very important that you make a time table and stick to it and you will have an exact idea of what you are required to study and the time required for it.

Concept clarity rather than rote learning

It is essential that you have a clear idea of the formulas and concepts rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you clear your basics and concepts before moving on.

Prepare Notes

It is very important make small notes or a comprehensive list of formulas on each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.

Seek guidance

It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.

Sample Papers

Even though there may be a complete change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint.

Mock tests

The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams.

Time management

Time management can be learnt through thorough practice and regular test taking. So it is important that you practice it and practice it well.

Duration : 2 Hours

Important Instructions

The SAAT – 2016 will be held at different centres as per the schedule. The medium of examination is English. The examination hall shall be opened to the candidates half an hour before the examination commences. No candidate will be allowed to enter into the examination hall without a valid original / duplicate admits card. Candidates are required to take their respective seats at least 15 minutes before the commencement of the examination, strictly according to the sitting chart notified earlier by the Centre Superintendent. In no case, a candidate shall be allowed to enter the examination hall after the examination starts. Attendance will be taken by the invigilators on the Attendance Roll sheets provided by the Director (Admissions), with full signature of candidates against their Roll Numbers, 15 minutes before the commencement of examination. During the examination, the candidates have to enter their Roll Number, the Application Number and the Answer Sheet and also Serial Number on the Attendance Roll sheets, which shall be verified by the invigilators. No candidate will be allowed to leave the hall without surrendering his/ her question booklet and answer sheet until the examination is over. Ordinarily no candidate shall be allowed to leave the hall temporarily during the examination. Candidates suffering from any disease which renders their presence in the examination hall undesirable in the interest of other candidates will not ordinarily be allowed to enter the examination hall. Candidates are not allowed to have substitute writers, normally. Candidates should bring their own black / blue ball pens, HB pencils for writing and blackening the circles. Books, printed papers (other than their Admit Cards), manuscripts, or electronic gadgets such as mobile phones, cell phones and electronic diary calculators etc, should not be taken into the examination hall. The candidates are advised to check the perfectness the question booklet and answer sheet before attempting to answer. In case page/pages are found missing, torn or not in order, the candidates should immediately report to the invigilator and get a fresh question answer book issued after surrendering the defective ones. Candidates are not permitted to talk to each other in the examination hall. No one should receive any help from or assist another in any manner. Malpractice in any form detected during or after the examination would lead to not only cancellation of candidature but also more severe punishment as deemed fit by the SAAT–2016 committee. A candidate should write his/her roll number as assigned in his/her admit card and sign in the space provided in the question booklet and answer sheet. He/she should in no case write anywhere else on the answer sheet his/ her own name, roll number or anything else that is not strictly related to the answers to the questions given. Writing of any such thing a serious offence. The answer sheet without the candidate’s roll number clearly written in the space provided will not be examined. A candidate wishing to say anything should stand up in his/her seat and remain standing till the invigilator attends him/her. He/she should in no case leave the seat or make any noise to draw the invigilator’s attention. In any other matter not mentioned in these rules, the Centre Superintendent is empowered to take necessary decisions.