Get CollegeDekho
Mobile App
 Live Help
 0141-3990699
Login
Signup
Institutes
Courses & Exams
News & Articles

TANCET M.E./ M.Tech - Architecture Exam Pattern

Exam Pattern

The TANCET - Tamil Nadu Common Entrance Test for M.E./ M.Tech. - Architecture exam pattern is as follows - 

Sections Number of Questions Maximum Marks
Part – I Engineering Mathematics 20 20
Part – II Basic Engg. & Sciences 35* 20
Part – III Architecture 60/65** 60

 

Marking System - 

  • Multiple shading will be considered as the wrong answer and 1/3 mark will be reduced.
  • One mark will be awarded for every correct answer. 
  • *All the correct answers up to 20 will be awarded marks and all the wrong answers shall be taken into consideration for awarding negative marks.
  • **All the correct answers up to 60 will be awarded marks and all the wrong answers shall be taken into consideration for awarding negative marks.
  • Negative marking will be applied, 1/3 mark will be deducted for every wrong answer. 
  • Normalization process - On evaluation, the mean (m) mark and the standard deviation (s) of raw marks (r) may vary from discipline to discipline under Part – III. Marks will be normalised using the formula - Normalised marks = 40 + (10/s) (r – m). This gives the relative ranking of the candidates in any discipline.

Syllabus Summary

No. Of Subject 8
No. Of Unit 22
No. Of Chapter 127
Chapters
  1. Planning process
  2. Types of plans
  3. Concepts, Theories and Principles
  4. Sustainable Urban Development
Chapters
  1. Emerging concepts of cities
Chapters
  1. Concepts, Principles Neighbourhood
  2. Housing Typologies
  3. Slums
  4. Affordable Housing
  5. Housing for Special Areas
  6. Residential Densities
  7. Standards for Housing
  8. National Housing Policies, Programs and Schemes
Chapters
  1. Principles of Strength of Materials
  2. Design of Structural Elements
  3. Elastic and Limit State design
  4. Structural Systems
  5. Form and Structure
  6. Principles of Pre-stressing
  7. High Rise and Long Span Structures
  8. Principles and Design of Disaster Resistant Structures
Chapters
  1. Law of Demand and Supply
  2. Social, Economical and Environmental CBA
  3. Techniques of Financial Appraisal
  4. Management of Infrastructure Projects
  5. Development guidelines
Chapters
  1. Tools and Techniques of Surveys
  2. Methods of Non-Spatial and Spatial Data Analysis
  3. Graphic Presentation of Spatial Data
  4. Application of G.I.S
  5. Remote Sensing techniques
  6. Decision support system
  7. Land Information System
Chapters
  1. Land Acquisition Act
  2. PPP
  3. Local self-governance
Chapters
  1. Natural and man-made Ecosystem
  2. Ecological Principles
  3. Concepts of Environmental Impact Analysis
  4. Environmental Considerations
  5. Principles of Lighting and Illumination
  6. Climate Responsive Design
  7. Solar architecture
  8. Principles of architectural Acoustics
Chapters
  1. Environmental pollution- types, causes
  2. Controls and Abatement strategies
Chapters
  1. Concepts and Rating
  2. ECBC
  3. Building Performance Simulation and Evaluation
Chapters
  1. Elements of Urban Built Environment
  2. Principles, tools and techniques
  3. Urban Renewal and Conservation
  4. Site Planning
  5. Landscape Design
Chapters
  1. Concepts and Theories
  2. Public Perception
  3. Townscape
  4. Public Realm
  5. Urban Design Interventions
  6. Historical and Modern Examples
Chapters
  1. FAR
  2. Densities
  3. Building Byelaws
Chapters
  1. Elements, Construction, Architectural styles
  2. Oriental, Vernacular and Traditional Architecture
  3. Architectural Developments
  4. Influence of modern art
  5. Deconstruction in Architecture
  6. Recent trends in Contemporary Architecture
  7. Works of architects
Chapters
  1. Visual composition in 2D and 3D
  2. Principles of Art and Architecture
  3. Organization of Space
  4. Architectural Graphics
Chapters
  1. Concepts of CAD, BIM, 3D modeling
  2. Architectural Rendition
  3. Programming languages and automationa
  4. Anthropometrics
  5. Site Planning
  6. Circulation
  7. Barrier free design
  8. Space Standards
  9. Building Codes
Chapters
  1. Water supply
  2. Sewerage and drainage systems
  3. Sanitary fittings and fixtures
  4. Plumbing systems
  5. Principles of internal and external drainage system
  6. Principles of Electrification of Buildings
  7. Intelligent Buildings
  8. Elevators and Escalators
  9. Air-Conditioning systems
  10. Firefighting Systems
  11. Building Safety and Security
Chapters
  1. Principles of water supply and sanitation systems
  2. Water Treatment
  3. Water supply and distribution system
  4. Water harvesting systems
  5. Storm Water Drainage System
  6. Sewage disposal methods
  7. Methods of solid waste management
  8. Recycling and Reuse of solid waste
  9. Power Supply and Communication Systems
Chapters
  1. Process and Principles
  2. Road Capacitya
  3. Traffic Survey Methods
  4. Traffic Flow Characteristics
  5. Traffic Analysis and Design Considerations
  6. Travel Demand Forecasting
  7. Design of roads
  8. Hierarchy of roads
  9. Traffic and transport management
  10. Mass transportation planning
  11. Pedestrian and slow moving traffic planning
  12. Intelligent Transportation Systems
Chapters
  1. Transportation
  2. Water Supply
  3. Sewerage, Drainage
  4. Solid Waste Management
  5. Electricity and Communications
Chapters
  1. Behavioral Characteristics and Applications
Chapters
  1. Building construction techniques
  2. Building systems
  3. Principles of Modular Coordination
  4. Estimation, specification, valuation
  5. Construction Planning and Equipments
  6. Project Management Techniques

How to prepare

Preparation Strategy

Make a proper Time Table

 It is very important that you make a time table and stick to it and you will have an exact idea of what you are required to study and the time required for it. 

Concept clarity rather than rote learning

 It is essential that you have a clear idea of the formulas and concepts rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you clear your basis and concepts before moving on.

Prepare Notes

It is very important make small notes or a comprehensive list of formulas on each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.

Revision of Class XI and XII concepts

Make sure that you revise your concepts from the syllabus of these classes before starting anything new as most of the engineering exams will be for admission to undergraduate courses and so the syllabi from class XI and XII becomes the testing ground to check students.

Seek guidance

It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.

Sample Papers

Even though there may be a complete   change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint. 

Mock tests

The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building  speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank 

Time management

Time management can be learnt through thorough practice and regular test taking. So it is important that you practice it and practice it well.

Negative marking

Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.

Duration : 120 Minutes

Important Instructions

i) Candidates must reach the examination venue at least half an hour (30 minutes) before the start of the examination ii) Candidates will not be allowed to enter the examination hall half an hour (30 minutes) after the start of the examination, i.e. 10.00 am iii) Candidates will be allowed to leave the examination hall only after one hour from the start of the examination, i.e. 10.30 am iv) Use of log tables and calculators in the examination hall are not allowed v) Candidates must bring their own pen, pencil, eraser and other stationeries vi) Candidates must bring their Admit Card and Identity Card to the examination hall vii) Mobile phone and other electronic gadgets are not allowed inside examination