Institutes
Courses & Exams
News & Articles

### TANCET M.E./ M.Tech - Physics And Material Science Exam Pattern

#### Exam Pattern

The TANCET - Tamil Nadu Common Entrance Test for M.E./ M.Tech. - Physics And Material Science exam pattern is as follows -

 Sections Number of Questions Maximum Marks Part – I Engineering Mathematics 20 20 Part – II Basic Engg. & Sciences 35* 20 Part – III Physics And Material Science 60/65** 60

Marking System -

• Multiple shading will be considered as the wrong answer and 1/3 mark will be reduced.
• One mark will be awarded for every correct answer.
• *All the correct answers up to 20 will be awarded marks and all the wrong answers shall be taken into consideration for awarding negative marks.
• **All the correct answers up to 60 will be awarded marks and all the wrong answers shall be taken into consideration for awarding negative marks.
• Negative marking will be applied, 1/3 mark will be deducted for every wrong answer.
• Normalization process - On evaluation, the mean (m) mark and the standard deviation (s) of raw marks (r) may vary from discipline to discipline under Part – III. Marks will be normalised using the formula - Normalised marks = 40 + (10/s) (r – m). This gives the relative ranking of the candidates in any discipline.

### Syllabus Summary

 No. Of Subject 9 17 87
Chapters
1. Laws Of Thermodynamics
2. Macrostates And Microstates
3. Classical And Quantum Statistics
5. Planck’s Distribution Law
6. Bose Einstein Condensation
7. First And Second Order Phase Transitions
Chapters
1. Metals, Semiconductors And Insulators
2. Conductivity, Mobility And Effective Mass
3. Optical, Dielectric And Magnetic Properties Of Solids
Chapters
1. Type-I And Type Ii Superconductors
2. Meissner Effect
3. London Equation
Chapters
1. Diodes
2. Bipolar Junction Transistors
3. Field Effect Transistors
Chapters
1. Active Filters And Oscillators
2. Regulated Power Supplies
3. Basic Digital Logic Circuits
4. A/D And D/A Conversion
Chapters
1. Elements Of Crystallography
2. Diffraction Methods For Structure Determination
3. Free Electron Theory
Chapters
1. Ls And Jj Coupling
2. Zeeman And Stark Effects
3. Rotational And Vibrational Spectra
4. Franck Condon Principle
5. Raman Effect
6. Nmr, Esr, X-Ray Spectra
Chapters
1. Postulates Of Quantum Mechanics
2. Schrodinger Equation
3. Harmonic Oscillator
4. Linear Vectors And Operators In Hilbert Space
5. Angular Momentum And Spin
7. Time Independent Perturbation Theory
8. Elementary Scattering Theory
Chapters
1. Solutions Of Electrostatic And Magnetostatic Problems
2. Dielectrics And Conductors
3. Maxwell’s Equations
4. Scalar And Vector Potentials
5. Coulomb And Lorentz Gauges
6. Electromagnetic Waves
7. Radiation From A Moving Charge
Chapters
1. Nuclear Radii And Charge Distributions
2. Nuclear Binding Energy
3. Electric And Magnetic Moments
4. Nuclear Models
5. Fermi Gas Model Of Nucleus
6. Alpha Decay, Beta?Decay
7. Electromagnetic Transitions In Nuclei
8. Rutherford Scattering
9. Fission And Fusion
10. Particle Accelerators And Detectors
11. Quark Model
Chapters
1. Cauchy- Riemann Conditions
2. Cauchy’s Theorems
3. Residue Theorem And Applications
4. Laplace Transforms
5. Fourier Analysis
Chapters
1. Covariant And Contravariant Tensor
2. Levi-Civita And Christoffel Symbols
Chapters
1. Orthogonality And Completeness
2. Matrices
3. Vector Calculus
4. Linear Differential Equations
Chapters
1. Numerical computation
2. Numerical Estimation
3. Numerical Reasoning
4. Data Interpretation
Chapters
1. English grammar
2. Sentence Completion
3. Verbal Analogies
4. Word Groups
5. Instructions
6. Critical Reasoning
7. Verbal Deduction
Chapters
1. Lorentz Transformations
2. Relativistic Kinematics
3. Mass Energy Equivalence
Chapters
1. D’alembert’s Principle
2. Lagrange’s Equation Of Motion
3. Central Force And Scattering Problems
4. Rigid Body Motion
5. Small Oscillations
6. Hamilton’s Formalisms
7. Poisson Bracket

#### How to prepare

Preparation Strategy

Make a proper Time Table

It is very important that you make a time table and stick to it and you will have an exact idea of what you are required to study and the time required for it.

Concept clarity rather than rote learning

It is essential that you have a clear idea of the formulas and concepts rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you clear your basis and concepts before moving on.

Prepare Notes

It is very important make small notes or a comprehensive list of formulas on each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.

Revision of Class XI and XII concepts

Make sure that you revise your concepts from the syllabus of these classes before starting anything new as most of the engineering exams will be for admission to undergraduate courses and so the syllabi from class XI and XII becomes the testing ground to check students.

Seek guidance

It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.

Sample Papers

Even though there may be a complete   change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint.

Mock tests

The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building  speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank

Time management

Time management can be learnt through thorough practice and regular test taking. So it is important that you practice it and practice it well.

Negative marking

Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.

Duration : 120 Minutes

#### Important Instructions

i) Candidates must reach the examination venue at least half an hour (30 minutes) before the start of the examination ii) Candidates will not be allowed to enter the examination hall half an hour (30 minutes) after the start of the examination, i.e. 10.00 am iii) Candidates will be allowed to leave the examination hall only after one hour from the start of the examination, i.e. 10.30 am iv) Use of log tables and calculators in the examination hall are not allowed v) Candidates must bring their own pen, pencil, eraser and other stationeries vi) Candidates must bring their Admit Card and Identity Card to the examination hall vii) Mobile phone and other electronic gadgets are not allowed inside examination