Get CollegeDekho
Mobile App
 Live Help
 0141-3990699
Login
Signup
Institutes
Courses & Exams
News & Articles

TANCET M.E./ M.Tech - Textile Technology Exam Pattern

Exam Pattern

The TANCET - Tamil Nadu Common Entrance Test for M.E./ M.Tech. - Textile Technology exam pattern is as follows - 

Sections Number of Questions Maximum Marks
Part – I Engineering Mathematics 20 20
Part – II Basic Engg. & Sciences 35* 20
Part – III Textile Technology 60/65** 60

 

Marking System - 

  • Multiple shading will be considered as the wrong answer and 1/3 mark will be reduced.
  • One mark will be awarded for every correct answer. 
  • *All the correct answers up to 20 will be awarded marks and all the wrong answers shall be taken into consideration for awarding negative marks.
  • **All the correct answers up to 60 will be awarded marks and all the wrong answers shall be taken into consideration for awarding negative marks.
  • Negative marking will be applied, 1/3 mark will be deducted for every wrong answer. 
  • Normalization process - On evaluation, the mean (m) mark and the standard deviation (s) of raw marks (r) may vary from discipline to discipline under Part – III. Marks will be normalised using the formula - Normalised marks = 40 + (10/s) (r – m). This gives the relative ranking of the candidates in any discipline.

Syllabus Summary

No. Of Subject 2
No. Of Unit 10
No. Of Chapter 71
Chapters
  1. Sampling Techniques, Sample Size
  2. High Volume Fibre Testing
  3. Tensile Testing
  4. Classimat Fault Analysis
  5. Statistical Analysis
Chapters
  1. Principles Of Opening, Cleaning And Mixing/Blending
  2. Technology Of Carding, Carding Of Cotton And Synthetic Fibres
  3. Drafting Operation
  4. Roller Arrangements In Drafting Systems
  5. Principles Of Cotton Combing, Combing Cycle
  6. Recent Developments In Comber
  7. Principle Of Ring Spinning, Forces Acting
  8. Working Principle Of Ring Doubler
  9. Yarn Contraction, Yarn Diameter
  10. Fibre Configuration And Orientation In Yarn
  11. Cause Of Fibre Migration
Chapters
  1. Impurities In Natural Fibre
  2. Mercerization Of Cotton
  3. Classification Of Dyes
  4. Dyeing Machines
  5. Dye Fibre Interaction
  6. Introduction To Thermodynamics And Kinetics Of Dyeing
  7. Styles Of Printing
  8. Mechanical Finishing Of Cotton
  9. Heat Setting Of Synthetic Fabrics
  10. Pollution Control And Treatment Of Effluents
Chapters
  1. Principles Of Winding Processes And Machines
  2. Yarn Clearers And Tensioners
  3. Different Systems Of Yarn Splicing
  4. Different Types Of Warping Creels
  5. Principles Of Pirn Winding Processes And Machines
  6. Dobby And Jacquard Shedding
  7. Mechanics Of Weft
  8. Basic Woven Fabric Constructions
  9. Peirce’s Equations For Fabric Geometry
Chapters
  1. Classification of textile fibers
  2. Fiber Forming Polymers
  3. Natural Fibers
  4. Natural And Man- Made Fibres
  5. Physical And Chemical Methods Of Fiber And Blend Analysis
  6. Molecular Architecture, Amorphous And Crystalline Phases
  7. Polymerization
  8. Melt Spinning Processes
  9. Wet And Dry Spinning Processes
  10. Post Spinning Operations
  11. Methods Of Investigating Fibre Structure
  12. Structure And Morphology
  13. Fibre Structure And Property Correlation
Chapters
  1. Limits, continuity and differentiability
  2. Partial Derivatives
  3. Maxima and Minima
  4. Sequences and Series
  5. Tests for Convergence
  6. Fourier Series
Chapters
  1. Linear And Non-Linear First Order Odes
  2. Higher Order Linear Odes
  3. Cauchy’s And Euler’s Equations
  4. Laplace transforms
  5. Pdes –Laplace
Chapters
  1. Solutions Of Linear And Non-Linear Algebraic Equations
  2. Integration Of Trapezoidal And Simpson’s Rule
  3. Single And Multi-Step Methods For Differential Equations
Chapters
  1. Definitions of probability and sampling theorems
  2. Conditional probability
  3. Mean, median, mode and standard deviation
  4. Random Variables
  5. Poisson, Normal And Binomial Distributions
  6. Correlation And Regression Analysis
Chapters
  1. Matrix Algebra
  2. Systems of Linear Equations
  3. Eigen values and eigen vectors.

How to prepare

Preparation Strategy

Make a proper Time Table

 It is very important that you make a time table and stick to it and you will have an exact idea of what you are required to study and the time required for it. 

Concept clarity rather than rote learning

 It is essential that you have a clear idea of the formulas and concepts rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you clear your basis and concepts before moving on.

Prepare Notes

It is very important make small notes or a comprehensive list of formulas on each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.

Revision of Class XI and XII concepts

Make sure that you revise your concepts from the syllabus of these classes before starting anything new as most of the engineering exams will be for admission to undergraduate courses and so the syllabi from class XI and XII becomes the testing ground to check students.

Seek guidance

It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.

Sample Papers

Even though there may be a complete   change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint. 

Mock tests

The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building  speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank 

Time management

Time management can be learnt through thorough practice and regular test taking. So it is important that you practice it and practice it well.

Negative marking

Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.

Duration : 120 Minutes

Important Instructions

i) Candidates must reach the examination venue at least half an hour (30 minutes) before the start of the examination ii) Candidates will not be allowed to enter the examination hall half an hour (30 minutes) after the start of the examination, i.e. 10.00 am iii) Candidates will be allowed to leave the examination hall only after one hour from the start of the examination, i.e. 10.30 am iv) Use of log tables and calculators in the examination hall are not allowed v) Candidates must bring their own pen, pencil, eraser and other stationeries vi) Candidates must bring their Admit Card and Identity Card to the examination hall vii) Mobile phone and other electronic gadgets are not allowed inside examination