VITMEE - Instrumentation Engineering Exam Pattern
The computer-based test (CBT) VIT University Masters Entrance Examination (VITMEE) question Paper consists of 100 questions.
There are two sections in the Exam viz. Engineering Mathematics and another according to respective graduation branch.
Each questions carries one mark.
Each question is followed by 4 alternative answers.
The candidate will have to choose the correct answer and click the same.
The maximum marks is 100.
No negative marks for wrong answers.
Test duration- 2 Hours
Exam Timings (IST):
I session - 10.00 am – 12.00 noon
II session - 2.30 pm – 4.30 pm
Marking System – No negative marks for wrong answers.
|No. Of Subject||10|
|No. Of Unit||16|
|No. Of Chapter||76|
- V-I relationships of Resistor, Inductor
- Transient analysis of RLC circuits with dc excitation
- Kirchoff’s laws
- Thevenin, Norton, Maximum Power Transfer
- Series and Parallel Resonance
- One-port and Two-port Networks
- Open and Short Circuit Parameters
- Limits, continuity and differentiability
- Maxima and Minima
- Mean value theorem
- Fourier Series
- Gauss And Green
- First order equations
- Higher order linear equations
- Euler-Cauchy equations
- Laplace transforms
- Initial and boundary value problems
- Vector algebra
- Matrix Algebra
- Systems of Linear Equations
- Rank of a matrix
- Eigenvalues and Eigenvectors
- Definitions of probability and sampling theorems
- Discrete Random variables
- Continuous random variables
- Descriptive statistics
- Hypothesis testing
- Analytic functions
- Cauchy’s integral theorem and integral Formula
- Taylor’s and Laurent’s series
- Residue theorem
- Accuracy and precision
- Numerical solutions of linear and non-linear algebraic equations
- Newton’s and Lagrange polynomials
- Integration by trapezoidal and Simpson’s rule
- Amplitude- and frequency modulation and demodulation
- Shannon's sampling theorem
- Optical sources and Detectors
- Basics of Fiber Optic Sensing
How to prepare
Syllabus For Entrance Examination according to respected branch which is-
Computer Aided Design/Computer Aided Manufacturing
Computer Science and Engineering
Energy and Environmental Engineering
Information Technology [Networking]
Power Electronics and Drives
Sensor System Technology
VLSI Design (Very Large Scale Integrated Circuits Design)
NOTE: For detail syllabus refer official brochure.
Make a proper Time Table
It is very important that you make a time table and stick to it and you will have an exact idea of what you are required to study and the time required for it.
Concept clarity rather than rote learning
It is essential that you have a clear idea of the formulas and concepts rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you clear your basics and concepts before moving on.
It is very important make small notes or a comprehensive list of formulas on each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.
Revision of Class XI and XII basic concepts
Make sure that you revise the basic concepts from the syllabus of these classes before starting anything new as most of the engineering exams will be for admission to undergraduate courses and so the syllabi from class XI and XII becomes the testing ground to check students.
It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.
Even though there may be a complete change in the exam pattern or the expected questions altogether, it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint.
The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank
Time management can be learnt through thorough practice and regular test taking. So it is important that you practice it and practice it well.
Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.
The e-Admit card will be generated once the candidate has booked his/her schedule through the Online Test Booking System. The e-Admit card will be auto generated for only those candidates who book a slot using the Online Test Booking system before the last date. The e-Admit card will indicate the e-Admit card number, photograph of the student, address of the test center, test date and time selected by the candidate. Discrepancies, if any, must be brought to the notice of VIT University immediately. The e-Admit card will be made available for candidates on www.vit.ac.in. Candidate should provide the application form number and Online Test Booking password to download the e- Admit card. The copy of the e-Admit card will also be emailed to the candidate. Candidates must provide a valid email ID in the application form. The e-Admit card will not be dispatched to candidates via post or fax. Candidates should ensure that a printer is connected to their computer while printing the e-Admit card. Candidates should take a printout of the e-Admit card using the print option on A4 size paper only. Please ensure that all information on the e-Admit card including photograph is clearly visible on the printout. Candidates will not be permitted to appear for the test without valid e-Admit card. Candidates must not mutilate the e-Admit card or change any entry made therein after it has been authenticated and received by them. Impersonation is a legally punishable offence. The e-Admit card is an important document and it must be preserved and produced at the time of counselling / admission Candidate should report to the selected test centre with 1. e-Admit card 2. Photocopy of the application form and 3. Any one of the following for photo identification. 4. School or college Photo ID card 5. Twelfth Standard board exam hall ticket (or) admit card bearing photo 6. Passport 7. Driving License 8. Voter ID card 9. IT Pan card