Raghu Engineering College Results: What Students Should Do After Checking Marks
After checking Raghu Engineering College results, download your marksheet and verify SGPA/CGPA as per AR20/AR23. Apply for re-evaluation or recounting within 7-10 days. If you failed the REC result, register for supplementary exams to clear backlogs.
After checking your Raghu Engineering College Results on the official website, your next steps depend on your marks and course performance. Students who have cleared their semester and passed their subject combinations must download their marksheet from theRaghu Engineering Collegeresult notification portal. You must enter your candidature roll number on the portal and click on “get OTP”. Following this, you will receive your OTP on your registered email or mobile number, which you submitted during your admission or exam registration process. You must verify your SGPA or CGPA as per the AR20 and AR23 academic regulations, which state that you must have a minimum of 160 credits to get your B.Tech/ M.Tech degree.
The passing criteria for internal exams for B.Tech is a minimum 40%, and you must meet a minimum attendance criteria of 75% to be eligible for placements. If you have objections regarding your scores, then you must apply for re-evaluation by paying Rs. 1000 per subject. On the other hand, if you failed, then you must pay Rs 300 per subject to reappear or clear your backlogs, and the fees increases upto Rs 1500 for multiple subjects. So, navigate your next steps from steps to do after checking your Raghu Engineering College results, official revaluation procedures to supplementary exam schedules, in this article.
Decoding Your Raghu Engineering College Grade Sheet: SGPA vs CGPA
Understanding the difference between SGPA and CGPA is vital to comprehend your academic standing at Raghu College of Engineering. Your Semester Grade Point Average measures your performance in a single semester. On the other hand, your Cumulative Grade Point average is the weighted average of all semesters that you have completed so far.
For example, suppose in semester 1 in your course, you have two subjects, namely Mathematics and Physics. So,
- Mathematics (4 Credits): You get an 'A' grade (9 points).
- Physics (3 Credits): You get a 'B' grade (8 points).
Your SGPA is calculated by multiplying credits by the grade points, then it is divided by the total credits:
Also Read:Why Filling the Jiwaji Exam Form Carefully Matters More Than Students Think
Why Does it Matter?
This is so because your SGPA can fluctuate, but your CGPA is something recruiters look for during campus placements. To maintain a first-class distinction at Raghu Engineering College, you require a minimum CGPA of 7.5 or above without any backlogs. If your CGPA drops below 5.0, then you fail to meet the requirements to be awarded a degree under AR20/ AR23 guidelines of the college.
So, to help you accurately calculate your scores, here is an official grade-to-point conversion used by Raghu Engineering College, tabulated below. This table follows the standard UGC 10-point scale typically adopted under AR20/ AR23 academic regulations.
Letter Grade | Description | Grade Points | Marks Range (in Percentage) |
O | Outstanding | 10 | 90% and above |
A+ | Excellent | 9 | 80% - 89% |
A | Very Good | 8 | 70% - 79% |
B+ | Good | 7 | 60% - 69% |
B | Above Average | 6 | 50% - 59% |
C | Average | 5 | 40% - 49% |
F | Fail | 0 | Below 40% |
Ab | Absent | 0 | - |
REC Revaluation and Recounting: Process & Fees
After checking your Raghu Engineering College results, if you feel your marks do not reflect your performance, you can apply for re-evaluation or recounting on the official website. The re-evaluation or recount request must be submitted within 7 to 10 days after your results are announced on the official site. Below mentioned is the Raghu College re-evaluation and recounting process along with the required fees for your reference.
- Re-evaluation Process:In the re-evaluation process, your answer scripts are checked by a different examiner. If you feel there is a grade gap or there is scope for getting more marks, you can apply for re-evaluation within a specified date stated by the college officials. You must pay a definite amount of Rs. 1000 per subject through debit/ credit/ net banking/ challan.
- Recounting Process:While you re-check your grades, if you find out that you have missed marks in some section, then you can apply for the recounting process. In this, the examiner recounts your marks and only checks for recounting errors or marking unmarked answers. There is a specific date that students will be notified based on which they must pay Rs. 100 per subject and apply for recounting their marks in that subject.
Ways to Handle “F” Grades: REC Supplementary Exam Rules
Securing an “F” or “AB” in your marksheet for one or multiple subjects requires you to register for the supplementary exams. Under AR20/ AR23 B.Tech & AR20/ AR25 M.Tech academic regulations of Raghu College of Engineering, you must clear your backlog subjects.
Only after clearing your backlogs will you earn credits to be awarded your B.Tech or M.Tech degree from the college. So, given below are the things you must know for appearing in the Supplementary examinations.
Minimum Passing Criteria for Supplementary Examinations
You have to score a minimum of marks to pass supplementary examinations and earn credits to be awarded your degree. So, below mentioned is the B.Tech or M.Tech marks criteria in case of supplementary exams at REC for your reference.
- B.Tech:You must have passed each subject with a minimum of 35% marks in the semester-end exam, which is 25 out of 70 marks. Your overall score must not be less than 40% in the exam. You can secure a credit of 160 within a maximum of 8 years of your course commencement.
- M.Tech:In case of M.Tech subjects, you must be more consistent in internal assessment and must not have below 40% aggregate marks to clear the backlog. You must get your M.Tech degree within four years of your course commencement.
Supplementary Exam Registration Fees & Late Penalties
The supplementary fees structure is standardised for every category of examinee. Whether you are clearing a single lab test or a major theory paper, you must submit your supplementary exam fees via your Department HOD or coordinator.
In case you miss any deadline for fee submission, then you will have to pay a fine of Rs. 500 per day. Provided below is the supplementary exam registration fee per subject count given below.
Total Subjects | Supplementary Fees |
One Subject | Rs. 300 |
Two Subjects | Rs. 600 |
Three Subjects | Rs. 900 |
Four Subjects | Rs. 1,200 |
Five Subjects and Above | Rs. 1,500 |
Supplementary Exam Schedule 2026
You must keep checking the “Exam Notification” section on the official website to not miss any supplementary exam-related updates. Below is the expected supplementary exam schedule for your reference.
Courses | Supplementary Exam Notification Dates |
B.Tech Courses | Third Week of February 2026 (Tentative) |
M.Tech Courses | Fourth Week of February 2026 (Tentative) |
So, managing checks after you know your REC scores is more than just a task. You must be very strategic while verifying your marks. You must collect hard copies of your transcripts from the examination department. Then, if you hit a CGPA of 7.0 or more, then with your updated credentials, connect with Raghu College of Engineering Placement Cell. You can discuss your chances of securing placement into top companies like Amazon or TCS, and more. The REC Placement Cell will guide you through the next steps to turn your academic hard work into a professional advantage.
Also Read:RRB JE Exam City Intimation 2026: Why Candidates Are Watching This Update Closely
If you are still confused about your next steps after checking marks at Raghu College of Engineering, then do log on to ourCollegeDekho Q&A Zoneor contact us on our toll-free helpline number 18005729877.