Adhiyamaan College of Engineering (ACE), Hosur Admission 2024 - Dates, Form, Online Process, Fees

The Adhiyamaan College of Engineering provides admission to various undergraduate and postgraduate in different fields such as engineering, management, computer application, etc. The applicants who are wishing to enter to any of the programs may submit a completed application form after receiving it from the College admission window from the official website before the last date. Before applying to any program the candidates are advised to read all of the instructions available in the admission brochure. No candidate will be allowed to change the chosen subject or category once the application form has been submitted. And at the time of fill-up up the application form, the candidates are also required to attach various documents such as class 10th & 12th mark sheets, Entrance result, transfer Certificates etc. After the last date of registration, no other application will be accepted. In addition to this, candidates may check the eligibility criteria for all the programs listed below before proceeding for the admission process of Adhiyamaan College of Engineering. Each graduation program has a separate eligibility process and the required percentage for the admission.

• The candidate who have passed 10+2 or its equivalent examination with Mathematics as one of the subjects.
• OBC candidates should have secured not less than 50% marks in aggregate in all the semesters put together.
• SC / SCA / ST candidates should have secured not less than 45% marks in aggregate in all the semesters put together.
• The candidate who have passed 10+3 Diploma (any stream) recognized by Central / State Governments.
• OBC candidates should have secured not less than 50% marks in aggregate in all the semesters put together.
• BC / BCM / MBC  DNC / SC / SCA / ST candidates should have secured not less than 45% marks in aggregate in all the semesters put together.

A pass in a recognised Bachelor’s degree of minimum 3 years duration and obtained atleast 50 % (45 % in the case of candidates belonging to     reserved   category)  in  the  qualifying  degree examination. 

• 10+2+3 years pattern    (or)

• 10+3 years Diploma +3 years pattern   (or)

• B.E./B.Tech./B.Arch./B.Pharm.    (or)

• (i)   10+2+AMIE*        (or) 
  (ii) 10+3 years diploma (awarded by the State Board of Technical Education) + AMIE.* 

A Pass in a recognised Bachelor’s degree of minimum 3 years duration (10+2+3 years pattern) in BCA, B.Sc. (Computer Science / Information Technology) with mathematics as a course at 10+2 level or at Graduate level and obtained atleast 50 % (45 % in the case of candidates belonging to reserved category) in the qualifying degree examinations.

• A pass in a recognised Bachelor’s degree or equivalent in the relevant field and obtained atleast 50 % (45 % in the case of candidates belonging to reserved category) in the qualifying degree examination.

• B.E / B.Tech. / B.Arch. degree programme.           

• B.Pharm. / B.Sc (Agri. / Forestry / Horticulture / Fishery) degree programme.       

• Master’s Degree in the relevant branch of Science / Arts, which are prescribed. 

• M.Sc. (5 years) Integrated Degree Programme. (or)

• B.Sc. 3 years (Computer Science / Information Technology) and M.Sc. 2 years (Computer Science / Information Technology) (or)

• MCA (3 years) after 10+2+3 years bachelor’s degree. (or)

• MCA (Lateral Entry) (2 years) after 10+2+3 years degree in BCA or B.Sc. (Computer Science / Information Technology)

• 10+2+AMIE*         (or) 

• 10+3 years diploma  (awarded by the  State Board of Technical Education) + AMIE*.

HSC (Academic)  

A pass in the HSC (Academic) or its equivalent with a minimum average percentage in Mathematics, Physics and Chemistry put together as given below:  

 
HSC (Vocational)  

A pass in any one of the HSC (Vocational subject) with any one of the Engineering related subjects namely Mathematics, Physics or Chemistry with a minimum average percentage put together as given below:  

Admissions to the 4-year B.E./B.Tech program will be made on the basis of TNEA. It is mandatory for the applicant to achieve a satisfactory score in the qualifying test in order to make them eligible for admission. All the candidates who are willing to apply for admission at Adhiyamaan College of Engineering must fill the college application form and have appeared in the entrance test. The candidates who are seeking admission in B.Tech (lateral entry) course must have  Diploma or B.Sc degree from a recognized University. Candidates looking forward to taking Admission can find out the relevant information here.

Adhiyamaan College of Engineering B.Tech Eligibility Criteria 2020

The candidate should have passed 10+2 with English, Physics, Chemistry and Mathematics as compulsory subjects from any recognized board with at least 45% marks for general category candidates and 40% for the backward class including backward class Muslim, MBC & DNC, SC / SCA / ST candidates.

For B.Tech Lateral Entry:-

For B.E /B. Tech lateral entry admissions, B.Sc and Diploma candidates are also eligible. The candidate must have scored minimum 55% marks (general category), 50% marks in case of backward class candidates and 45% marks for MBC & DNC candidates in the final or pre-final semester. Also, the candidate must have Mathematics as a core subject.

Adhiyamaan College of Engineering Application Process 2020

The application process is elaborated below:-

• The admission in the 4 years B.E/B. Tech course at ACE is offered on the basis of TNEA Counseling. The candidate seeking admission must have to register on the official website of TNEA for the counselling process. TNEA Application Form is available in online mode only. Candidates have to first opt for registration with personal and academic details.

• The admission cycle for TNEA Counseling usually begins with the application submissions which are made available for the candidates in the month of May and the final counselling process commences in the month of June. The admissions cycle ends with the commencement of the academic session which usually begins in the month of August.

Documents required for Adhiyamaan College of Engineering UG Application Form 2020

For Government Quota:-

• TNEA Mark Sheet (NATA for B.Arch)

• Class 12th Mark Sheet (including arrear mark sheet if any)

• Transfer Certificate (TC) of +2 or diploma

• Community Certificate (Permanent Card)

• The diploma Mark sheet and Provisional Certificate

• First Graduation Certificate Signed by Tahsildar (if applicable)

• First Graduation - Joint Declaration signed by Parent and Student (if applicable)

• PH (Physically Handicapped) - Medical Board Certificate (if applicable)

For Management Quota:-

• NATA mark sheet

• Class 12th Mark Sheet

• Community Certificate

• PEC (Provisional Eligibility Certificate) for NRI / Foreign Nationals from Anna University

• Equivalency Certificate (if required)

Adhiyamaan College of Engineering B.Tech Selection Process 2020

The seats are allotted for both B.Tech & B.tech (Lateral Entry) through Tamil Nadu Engineering Admissions (TNEA) counselling guidelines based on marks obtained in class 12th final examination.

B. Arch admissions are based on the NATA entrance test. The candidates should have passed (pass mark is 80 out of 200) NATA. The detailed information about ACE B.Arch is given below.

Adhiyamaan College of Engineering B.Arch Eligibility Criteria 2020

The candidate needs to qualify one of the following criteria for admission in B.Arch course:-

• The candidates should have passed 10+2 or its equivalent examination with mathematics as one of the subjects: OC candidates minimum 50% marks in aggregate in all the semesters put together. BC / BCM / MBC & DNC / SC / SCA / ST candidates should have minimum 45% marks in aggregate in all the semesters put together.

• The candidate who passed 10+3 Diploma (any stream) recognized by Central / State Governments and should have minimum 50% marks in aggregate. 

• Aside from the candidates must register for NATA entrance exam

Adhiyamaan College of Engineering B.Arch selection process 2020

The selection of the candidate will be based on the score of NATA examination.

MBA admissions at Adhiyamaan College of Engineering are based on TANCET entrance test. The admission process is provided below.

Adhiyamaan College of Engineering MBA Important Dates 2020

The important dates for admissions are provided below:

Adhiyamaan College of Engineering MBA Eligibility Criteria 2020

The candidate should have passed bachelor's degree of minimum 3 years duration and scored at least 50% marks from any recognized university. Also, the candidate must have appeared for TANCET examination.

Adhiyamaan College of Engineering MBA Application Process 2020

• The candidates seeking admission for MBA course must register on the official website of TANCET. The application fee is INR 500 for general category (INR 250 for reserved category).  Candidates must fill in their basic personal and academic information to complete the online registration part. Through TANCET Registration, a unique user ID and password will be sent via SMS. These credentials are vital for successfully completing the form filling procedure.

• After the TANCET result, a merit list will be prepared.

• TANCET 2020 counselling will take place at the chosen centres and admissions will be done purely on the basis of TANCET cut off.

• Based on the counselling, seats will be allotted to the candidates. Once a seat is allotted, the amount of INR 5,000 for general or INR1,000 for SC/SCA/ST candidates already paid at the time of counselling will be adjusted in the tuition fee.

Documents Required for Adhiyamaan College of Engineering PG Application Form 2020

For Government Quota:-

• TANCET Entrance Mark sheets

• Community Certificate

• Transfer Certificate

• Class 10th & 12th / Diploma Marksheet

• All individual semester mark sheets of the graduate degree

• Provisional / Degree Certificates

For Management Quota:-

• Consortium Entrance Marksheet

• Community Certificate

• Transfer Certificate

• Tenth & Plus Two / Diploma Mark sheet 

• Enclose either consolidated mark sheet or  

• All individual semester mark sheets of the graduate along with arrear mark sheet.

• Provisional / Degree Certificates

Adhiyamaan College of Engineering MBA Selection Process 2020

The selection of the candidates will be based on the score of TANCET examination.

The detailed information about MCA Admission is given below.

Adhiyamaan College of Engineering MCA Admissions Important Dates 2020

The important dates are provided below:-

Adhiyamaan College of Engineering MCA Eligibility Criteria 2020

The candidate should have passed bachelor's degree of minimum 3 years duration with mathematics at 10+2 level or graduate level and obtain at least 50% marks(45 % in the case of reserved category)

For MCA (Lateral Entry)

The candidate should have passed bachelor's degree of minimum 3 years duration in BCA, B.Sc with mathematics at 10+2 level or Graduate level and scored at least 50% marks(45 % in the case of reserved category).

Adhiyamaan College of Engineering MCA Application Process 2020

• For admission in MCA course, the applicant must register for TANCET examination.

• Merit list for admission will be prepared based on the marks obtained and rank secured in the TANCET exam.

• The seats will be allotted to candidates based on TANCET merit.  The choice filling will be done during the counselling process and availability of seats in the participating institutes.

Adhiyamaan College of Engineering MCA Selection Process 2020

The selection of the candidates will be based on the score of TANCET examination. The Merit List for admission will be drawn upon the basis of the marks secured and the rank obtained in the TANCET entrance exam

Adhiyamaan College of Engineering offers M.E/M.Tech course in various specializations. The M.Tech admission is based on the entrance score. The detailed information is specified below.

Adhiyamaan College of Engineering ME/M.Tech Eligibility Criteria 2020

The candidate should have passed a Bachelor's degree or 10+2+AMIE or 10+3 years diploma and scored at least 50% marks(45 % in the case of reserved category) from any recognized university. Also, the candidate must have appeared for GATE.

Adhiyamaan College of Engineering ME/M.Tech Application Process 2020

• For admission in M.E/M. Tech course the applicant must register for GATE or TANCET examination

• Anna University will conduct Tamil Nadu Common Admissions or TANCA 2020 for the qualified candidates of the GATE entrance exam. Merit list for admission will be prepared based on the marks obtained and rank secured in the TANCET exam or the GATE score.

• The seats will be allotted to candidates based on GATE or TANCET merit.  The choice filling will be done during the counselling process and the availability of seats in the participating institutes.

Adhiyamaan College of Engineering ME/M.Tech Selection Process 2020

The selection of the candidates will be on the basis of GATE or TANCET score.