GATE Metallurgical Engineering (MT) Practice Papers 2024

Ritoprasad Kundu
Ritoprasad KunduUpdated On: November 14, 2023 08:53 am IST | GATE
Candidates preparing for GATE Metallurgical Engineering paper must ensure to daily practice MT GATE practice questions to have a clear knowledge of the GATE Metallurgical Engineering syllabus. Candidates can check the GATE practice papers of Metallurgical Engineering here in this article.
GATE Metallurgical Engineering

GATE Metallurgical Engineering (MT) Practice Papers 2024: Indian Institute of Science, Bangalore will conduct the GATE Metallurgical Engineering exam as a computer based test (CBT) for a total time duration of 3 hours. GATE 2024 exam will be conducted on February 3, 4, 10 and 11, 2024 in two shifts i.e the morning shift and the afternoon shift by IISc Bangalore. Candidates preparing for Metallurgical Engineering GATE examination 2024 must regularly solve the Metallurgical Engineering GATE Practice Questions 2024. By utilising the GATE Metallurgical Engineering Practice Papers candidates can make the best assessment possible of their level of preparation and at the same time will be well versed with the pattern of questions to be asked in the GATE 2024 exam. Candidates attempting the GATE exam for the first time must be well accustomed with the Metallurgical Engineering question paper pattern, which is highly important to avoid panicking during the actual examination. Moreover, solving the GATE Metallurgical Engineering Practice Papers 2024 will significantly boost up the confidence level of the students. Aspirants can check this article to download the GATE general aptitude practice questions and also the core subject i.e. Metallurgical Engineering GATE Practice Questions 2024 here.

GATE Practice Papers for Metallurgical Engineering 2024 - PDF Download (Core Subject)

GATE Metallurgical Engineering Practice questions 2024 can be downloaded by the candidates by clicking the link provided in the table below. The GATE practice papers of Metallurgical Engineering are quite helpful for every candidate as it gives the candidates a distinct view of the major topics that one must prepare for the GATE exam Metallurgical Engineering paper. Moreover, with GATE practice papers of Metallurgical Engineering candidates will also be able to comprehend the important portions of the GATE  syllabus from which questions are repeated in the previous years. 

GATE Practice Questions for Metallurgical Engineering - Click Here

GATE Practice Questions 2024 for Metallurgical Engineering - General Aptitude Questions PDF Download 

All GATE exam papers include a compulsory section on general aptitude. Students solving the general aptitude questions of GATE correctly, can enhance the level of confidence which is directly evident when they begin attempting questions from the core subject. Therefore, solving general aptitude questions not only help candidates score the requisite marks but it allows them to develop a sense of confidence. Using the PDF download link provided in the table below, aspirants can download the GATE practice papers for the general aptitude section.  

GATE Practice Papers for General Aptitude - Click Here

Also Read: 

Section Wise Division of GATE 2024 Metallurgical Engineering Syllabus

Candidates preparing for the GATE 2024 Metallurgical Engineering must be aware of the sections that consist of the GATE Metallurgical Engineering syllabus 2024. All the sections of the syllabus are mentioned below. 

  • Engineering Mathematics
  • Metallurgical Thermodynamics
  • Transport Phenomena and Rate Processes
  • Mineral Processing and Extractive Metallurgy
  • Physical Metallurgy 
  • Mechanical Metallurgy
  • Manufacturing Processes

GATE Metallurgical Engineering (MT) Syllabus 2024 - Click Here to Download

Related Article: GATE Metallurgical Engineering (MT) Syllabus 2024

Important Topics of Metallurgical Engineering

Candidates can check the important topics for the Metallurgical Engineering paper here from the table below.

Sections

Important Topics

Engineering Mathematics

  • Matrices and Determinants
  • Limit, Continuity and Differentiability
  • Partial Derivatives
  • Test for Convergence
  • Divergence and Curl
  • Cauchy’s and Euler’s Equations
  • Laplace Transforms
  • Poisson, Normal and Binomial Distributions
  • Integration By Trapezoidal And Simpson’s Rule 
  • Solutions Of Linear And Non-Linear (Bisection, Secant, Newton- Raphson Methods) Algebraic Equations

Metallurgical Thermodynamics

  • Second Law - Entropy
  • Maxwell’s Relations 
  • Enthalpy, Gibbs And Helmholtz Free Energy
  • Ellingham And Phase Stability Diagrams
  • Electrochemical Cells
  • Nernst Equation

Transport Phenomena and Rate Processes

  • Concept Of Viscosity
  • Bernoulli’s Equation
  • 1-D Steady State Conduction
  • Heat Transfer Coefficient Relations For Forced Convection
  • Stefan-Boltzman Law
  • Kirchhoff’s Law
  • Buckingham Pi Theorem
  • Arrhenius Relation

Mineral Processing and Extractive Metallurgy

  • Agglomeration: Sintering, Pelletizing And Briquetting
  • Principles And Processes For The Extraction Of Non-Ferrous Metals – Aluminium, Copper And Titanium
  • Material And Heat Balance In Blast Furnace
  • Ladle Process

Physical Metallurgy

  • Bragg’s Law
  • Principles Of Sem Imaging
  • Coherent, Semi-Coherent And Incoherent Interfaces
  • Kirkendall Effect
  • Pipe Diffusion And Grain Boundary Diffusion
  • Dendritic Solidification And Constitutional Supercooling
  • Precipitate Coarsening
  • Gibbs-Thomson Effect
  • TTT and CCT Diagrams

Mechanical Metallurgy

  • Representation By Mohr’s Circle
  • Plastic Deformation By Slip And Twinning
  • Griffith Theory
  • Mechanisms Of High Temperature Deformation And Failure
  • Fracture Toughness

Manufacturing Processes

  • Gating And Risering
  • Wire Drawing And Sheet Metal Forming
  • Principles Of Soldering
  • Powder Metallurgy
  • Dye-Penetrant
  • Ultrasonic
  • Radiography 
  • Eddy Current

GATE Previous Year Question Papers of Metallurgical Engineering

GATE previous year question papers of Metallurgical Engineering have been mentioned below.

List of Books to Prepare for Metallurgical Engineering Paper

Candidates can check the list of books to cover the entire Metallurgical Engineering syllabus of GATE 2024.

Name of the Book

Name of the Author / Publisher

Higher Engineering Mathematics 

Bandaru Ramana

Thermodynamics Databook

Richard E Sonntag and Claus Borgnakke

Metal Casting Processes, Metallurgy, Techniques and Design

John Campbell

Heat and Thermodynamics 8th Edition

Amit Chattopadhyay

Physical Metallurgy 

V Raghvan 

Metallurgical Thermodynamics Kinetics and Numericals

A. B. Lele

Introduction to Physical Metallurgy 2 Edition

Tata McGraw Hill

Engineering Physical Metallurgy Edition 1

Y. Lakhtin

Mechanical Metallurgy 3rd Edition

George E. Deiter

An Introduction to Modern Iron Making

R H Tupkary

Manufacturing Process 1

Sandy Khippal

Extraction of Non-Ferrous Metal 01 Edition

Ray

Related Articles:

In this article, we have covered in depth the Metallurgical Engineering GATE practice questions for the core subject, the Metallurgical Engineering paper, as well as the GATE practice papers for the general aptitude part, along with some essential topics and books. This article can be used by candidates to adequately prepare for the GATE Metallurgical Engineering examination.


/articles/gate-metallurgical-engineering-practice-papers/
View All Questions

Related Questions

from which year M.Tech in renewable energy is started in ADYPU(NUOVOS)/

-SLIETPUNJABUpdated on February 08, 2024 03:08 PM
  • 2 Answers
Aditya, Student / Alumni

Dear SLIETPUNJAB, the M.Tech in Renewable Energy Engineering course at ADYPU Nuovos was started in 2022. The course is a two-year full-time postgraduate programme, designed to provide students with the knowledge and skills required to design, develop, and manage renewable energy systems. The course covers a wide range of topics, including solar energy, wind energy, hydro energy, biomass energy, and geothermal energy.

READ MORE...

Ycmo mein admission ke liye 10th pass par ho jayega kya, BCA krna ho toh

-Parasram Vitthal ShivsharanUpdated on February 07, 2024 10:22 AM
  • 2 Answers
Aditya, Student / Alumni

Dear Parasram, you cannot get admission to the Yashwantrao Chavan Mahavidyalaya Solapur BCA programme based on your class 10 scores. To be eligible for admission you must have a valid class 12 score in the science stream.  

READ MORE...

How this college ranks in Mtech syllabus,

-Manas Kr MitraUpdated on February 05, 2024 02:51 PM
  • 2 Answers
Soumavo Das, Student / Alumni

Dear Student,

National Institute of Technical Teachers Training & Research offers two-year M.Tech programmes in affiliation with MAKAUT. The M.Tech specialisations available at National Institute of Technical Teachers Training & Research are manufacturing technology, multimedia & software systems, mechatronics engineering, and structural engineering. The institute is the first among four NITTTRs across the country. As a result, it's M.Tech programmes are highly popular among students.

READ MORE...

Do you have a question? Ask us.

  • Typical response between 24-48 hours

  • Get personalized response

  • Free of Cost

  • Access to community

Recent Articles

Recent News

Subscribe to CollegeDekho News

By proceeding ahead you expressly agree to the CollegeDekho terms of use and privacy policy
Apply Now

Top 10 Engineering Colleges in India

View All

Never miss an exam update !!

Top