### Bharath Graduate Engineering Entrance Test (BGEET)- M.Tech - Power Systems Exam Pattern

#### Exam Pattern

**Test Duration-****Total Marks -**100**Total Questions-**100**Marking System–**- No negative marking for the wrong answer.

### Syllabus Summary

No. Of Subject | 11 |
---|---|

No. Of Unit | 26 |

No. Of Chapter | 121 |

- Mathematical Modeling and Representation of Systems
- Block diagrams and Signal flow graphs
- Routh-Hurwitz and Nyquist criteria
- Lag, Lead and Lead-Lag Compensators
- P, PI and PID Controllers
- State Space Model

- Numerical computation
- Numerical Estimation
- Numerical Reasoning
- Data Interpretation

- English grammar
- Sentence Completion
- Verbal Analogies
- Word Groups
- Instructions
- Critical Reasoning
- Verbal Deduction

- Bridges and Potentiometers
- Measurement of voltage, current, power
- Instrument Transformers
- Oscilloscopes
- Error analysis

- Coulomb's Law
- Gauss's Law, Divergence
- Effect of dielectric medium
- Capacitance of simple configurations
- Biot-Savart’s law
- Ampere’s law
- Faraday’s law
- Lorentz force
- Self and Mutual Inductance

- Continuous and Discrete-Time Signals
- Shifting and Scaling Operations
- Linear Time Invariant and Causal systems
- Fourier Series
- Laplace Transform
- Z-Transform

- Architecture
- Programming and Interfacing

- Characteristics of diodes
- BJT
- MOSFET

- Characteristics and applications
- Combinational and Sequential logic circuits
- Multiplexer, Demultiplexer
- A/D and D/A converters

- Rectifiers
- Amplifiers
- Oscillators and Feedback Amplifiers

- Functions of single variable
- Limits, continuity and differentiability
- Mean value theorem
- Chain rule
- Partial Derivatives
- Maxima and Minima
- Gradient
- Divergence and curl
- Directional derivatives
- Integration
- Theorems Of Stokes
- Gauss And Green
- Fourier Series

- First order linear and nonlinear differential equations
- Higher Order Linear Odes
- Partial differential equations
- Laplace transforms
- Numerical methods for linear and nonlinear algebraic equations
- Numerical integration and differentiation

- Matrix Algebra
- Systems of Linear Equations
- Eigenvalues and Eigenvectors

- Solutions Of Linear And Non-Linear Algebraic Equations
- Numerical integration - trapezoidal and Simpson’s rule
- Numerical solutions of ODE

- Fourier Transform
- Laplace Transform
- Z-Transform

- Sampling theorems
- Conditional probability
- Mean, Median, Mode
- Poisson distribution
- Binomial distribution
- Regression analysis

- Analytic Functions
- Cauchy’s integral Theorem
- Taylor Series, Laurent Series
- Residue Theorem
- Solution Integrals

- Resonance
- Passive Filters
- Ideal Current and Voltage Sources

- Thevenin’s Theorem
- Norton’s Theorem
- Superposition Theorem
- Maximum power transfer Theorem
- Power and power factor in AC Circuits

- Network graph
- KCL, KVL
- Node and Mesh Analysis
- Transient Response of DC and AC Networks

- Cylindrical and Salient Pole Machines
- Electric Machines

- Equivalent Circuit
- Phasor Diagram
- Regulation and Efficiency

- Electromechanical Energy Conversion Principles
- DC Machines
- Three Phase Induction Motors
- Operating Principle of Single Phase Induction Motors

- Characteristics of Semiconductor Power Devices

- Buck, Boost and Buck-Boost Converters
- Bidirectional AC to DC Voltage Source Converters
- Power Factor
- Single Phase and Three Phase Inverters

- AC and DC Transmission Concepts
- Series and Shunt Compensation
- Bus Admittance Matrix
- Gauss- Seidel and Newton-Raphson load flow methods
- Voltage and Frequency Control
- Symmetrical and Unsymmetrical Fault Analysis
- System Stability Concepts

#### How to prepare

**Preparation Strategy**

**Make a proper Time Table**

It is very important that you make a timetable and stick to it and you will have an exact idea of what you are required to study and the time required for it.

**Concept clarity rather than rotes learning**

It is essential that you have a clear idea of the formulas and concepts rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you clear your basis and concepts before moving on.

__Prepare Notes__

It is very important to make small notes or a comprehensive list of formulas on each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.

**Revision of Class XI and XII concepts**

Make sure that you revise your concepts from the syllabus of these classes before starting anything new as most of the engineering exams will be for admission to postgraduate courses and so the syllabi from B.Tech becomes the testing ground to check students.

**Seek guidance**

It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.

**Sample Papers**

Even though there may be a complete change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint.

**Mock tests**

The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank

**Time management**

Time management can be learned through thorough practice and regular test taking. So it is important that you practice it and practice it well.

**Negative marking**

Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.

**Duration :**3 Hours

#### Important Instructions

- The provision of this reservation will be applicable in government as well as non-government aided institutions.
- The candidates, who are aspiring to get seats under Disabled Quota, should apply expressing their claims for the same along with the valid disability certificate.
- The candidate, seeking the benefit of reservation under Disabled Quota, should present him/herself before a medical board comprising of at least one expert/specialist from the specialty of orthopedics from state medical board in the state of Bihar and obtain a valid disability certificate from the medical board by claiming the benefit of reservation.
- The disability certificate of the candidate from a medical board shall
- Give a permanent disability certificate where there are no chances of variation in the degree of disability
- Indicate the period of validity in the certificate, in cases where there is any chance of variation in the degree of disability.

- In case, there are not enough number of Candidates, who qualify themselves for admission against reserved seats under Disabled Quota of any category, the consequent vacant seats should be merged with the seats of respective category.