### Bharath Graduate Engineering Entrance Test (BGEET)- M.Tech - Structural Engineering Exam Pattern

#### Exam Pattern

The **Bharath ****Graduate**** ****Engineering Entrance ****Test** **(BGEET) M.Tech - Structural Engineering **is Multiple Choice Question type paper, the questions are based on the subjects and topics of the respective discipline in B.Tech level. The paper pattern largely follows that of **GATE** exam pattern.

**Related to Respective discipline in B.Tech level**

**Test Duration-**** ** 3 Hours

**Total Marks -** 100

**Marking System – **No negative marking for the wrong answer.

### Syllabus Summary

No. Of Subject | 8 |
---|---|

No. Of Unit | 28 |

No. Of Chapter | 130 |

- Sub-surface investigations
- Earth pressure theories
- Stability of slopes
- Boussinesq’s and Westergaard’s theories
- Shallow foundations
- Terzaghi’s and Meyerhoff’s bearing capacity Theories
- Deep foundations

- Origin of soils, soil structure and fabric
- Permeability
- Darcy’s law
- Principle of effective stress
- Mohr’s circle

- Principles of surveying
- Maps
- Levelling and trigonometric levelling
- Photogrammetry
- Remote sensing
- Geographical information system (GIS)
- Geographical Positioning system (GPS)

- Highway materials
- Design of bituminous paving mixes
- Design of flexible pavement
- Design of rigid pavements
- Distresses in concrete pavements

- Geometric Design of Highways
- Geometric design of railway track
- Airport runway length

- Traffic studies on flow, speed, travel time
- Microscopic and macroscopic parameters
- Webster’s method
- Types of intersections and channelization

- Working stress
- Design of beams
- Bond and development length
- Prestressed concrete

- Bending moment and shear force
- Theories of failures
- Simple bending theory
- Uniform torsion, buckling of column

- Design of tension and compression
- Connections - simple and eccentric
- Plastic analysis of beams and frames

- Equilibrium equations
- Internal forces in structures
- Kinematics
- Euler’s equations of motion
- Energy methods

- Construction Materials
- Concrete
- Bricks and mortar
- Construction Management
- Cost estimation
- Project planning and network Analysis - PERT and CPM

- Statically determinate and indeterminate structures
- Method of superposition
- Displacement methods
- Influence lines

- Functions of single variable
- Limits, continuity and differentiability
- Mean value theorem
- Chain rule
- Partial Derivatives
- Maxima and Minima
- Gradient
- Divergence and curl
- Directional derivatives
- Integration
- Theorems Of Stokes
- Gauss And Green
- Fourier Series

- Vector algebra
- Matrix Algebra
- Systems of Linear Equations
- Rank of a matrix
- Eigenvalues and Eigenvectors

- First order equations
- Higher order linear equations
- Euler-Cauchy equations
- Laplace transform
- Initial and boundary value problems

- Fourier series
- Solutions of one- dimensional diffusion equation
- First and second order one-dimensional wave equation
- Two-dimensional Laplace equation

- Definitions of probability and sampling theorems
- Discrete Random variables
- Continuous random variables
- Descriptive statistics
- Hypothesis testing

- Accuracy and precision
- Numerical solutions of linear and non-linear algebraic equations
- Newton’s and Lagrange polynomials
- Integration by trapezoidal and Simpson’s rule

- Numerical computation
- Numerical Estimation
- Numerical Reasoning
- Data Interpretation

- English grammar
- Sentence Completion
- Verbal Analogies
- Word Groups
- Instructions
- Critical Reasoning
- Verbal Deduction

- Hydrologic cycle
- Hydrograph Analysis
- Ground water Hydrology
- Application of Darcy’s law

- Crop water requirements
- Types of irrigation systems
- Water logging and drainage

- Forces on immersed bodies
- Dimensional analysis and hydraulic similitude
- Kinematics
- Basics of Hydraulic Machines
- Channel Hydraulics

- Properties of fluids, fluid statics
- Laminar and turbulent flow
- Concept of Boundary Layer

- Drinking water standards
- Sewage and sewerage treatment
- Primary, secondary and tertiary treatment of wastewater
- Domestic wastewater treatment

- Impacts of noise
- Measurement of noise
- Control of noise pollution

- Transportation of solid wastes
- Engineered systems for solid waste management

- Types of pollutants
- Air pollution meteorology

#### How to prepare

**Preparation Strategy**

**Make a proper Time Table**

It is very important that you ** make a timetable and stick to it** and you will have an exact idea of what you are required to study and the time required for it.

**Concept clarity rather than rotes learning**

It is essential that you have a clear idea of the ** formulas and concepts** rather than rote learning of things for the papers. While you might require it for memorizing formulas it is important that for other stuff you make sure you

**before moving on.**

**clear your basis and concepts****Prepare Notes**

It is very important to ** make small notes** or a

**each covered topic and chapter which will come in handy at the time of revision. This will require you to be regular with your work but will surely make things easy at the time of revision.**

**comprehensive list of formulas on****Revision of Class XI and XII concepts**

Make sure that you ** revise your concepts from the syllabus** of these classes before starting anything new as most of the engineering exams will be for admission to postgraduate courses and so the

**becomes the testing ground to check students.**

**syllabi from B.Tech****Seek guidance**

It is not possible for you to know everything in your syllabus, at least not at the time of preparation. Sooner or later you will run into a concept or so which will give you trouble and then it is best you seek guidance from an instructor or a teacher. It is necessary that you clear your doubts at regular intervals and don’t prolong things for long. Getting into a good coaching class is nothing to be ashamed off and if anything a regular coaching class will enable you to avoid roadblocks in your preparation.

**Sample Papers**

Even though there may be a complete change in the exam pattern or the expected questions altogether,it is important that you practice on the sample and previous years question papers available for the engineering exam you’d be attempting. You will know the existing pattern and have a fair idea of the type of questions to expect in the paper along with the time constraint.

**Mock tests**

The paper pattern, duration of the paper and the number of questions to be attempted in the given amount of time is not something you will be able to pick up on the day of the examination. A Mock Test tests a student’s abilities as it not only provides a similar feel of real exams but also helps in building speed and confident to face the exam. Furthermore, they can improve their performance to get an extra edge in actual exams. Try to build up an Engineering Entrance Exam Test Prep MCQ Question Bank

**Time management**

Time management can be learned through thorough practice and regular test taking. So it is important that you practice it and practice it well.

**Negative marking**

Most the entrance examinations will have negative marking and everyone would suggest you stay clear of questions are not sure about. But some experts are of the opinion that you answer the questions in which you are confused between an option or two because there will also be a chance of getting it right.

**Duration :**3 Hours

#### Important Instructions

The provision of this reservation will be applicable in government as well as non-government aided institutions. The candidates, who are aspiring to get seats under Disabled Quota, should apply expressing their claims for the same along with the valid disability certificate. The candidate, seeking the benefit for reservation under Disabled Quota, should present him/herself before a medical board comprising of atleast one expert / specialist from the speciality of orthopaedics from state medical board in the state of Bihar and obtain a valid disability certificate from the medical board by claiming the benefit of reservation. The disability certificate of the candidate from a medical board shall (i) Give a permanent disability certificate where there are no chances of variation in the degree of disability (ii) Indicate the period of validity in the certificate, in cases where there is any chance of variation in the degree of disability. In case, there are not enough number of Candidates, who qualify themselves for admission against reserved seats under Disabled Quota of any category, the consequent vacant seats should be merged with the seats of respective category.