GATE 2025 MT Qualifying Cutoff Marks: The qualifying marks for the GATE Metallurgical Engineering (MT) exam 2025 have been released. The GATE 2025 MT cutoff scores is released based on the categories of the students. The GATE 2025 MT qualifying marks for general is 40 for OBC/NCL is 35.6 and for SC/ST/PwD is 26.6. On average, around 3,000 students appear for the GATE Metallurgical Engineering exam every year. In the year 2024, a total of 3,111 students appeared in the exam, while only 723 met the required minimum qualifying cutoff marks. The GATE 2025 MT cutoff marks is determined based on several factors including the overall difficulty level of the GATE 2025 exam , the number of students participating, and the number of seats available in the respective GATE 2025 participating colleges .
The GATE 2025 cutoff marks are the minimum scores required to qualify for the Metallurgical Engineering exam. In this article, we have provided GATE 2025 MT qualifying cutoff marks and the previous year cutoff marks.
Latest Update –
GATE 2025 result
has been released at GOAPS porta
l, on March 19
Also Check - GATE 2025 MT Question Paper Analysis: Unofficial Answer Key with Solutions
Quick Links:
| GATE 2025 Counselling | GATE 2025 Cutoff |
|---|---|
| GATE 2025 Rank Predictor | GATE 2025 College Predictor |
GATE MT 2025 General Category Qualifying Marks
The GATE MT cutoff 2025 for the general category has been released. In the past year, the qualifying marks for General students in Metallurgical Engineering have seen a significant dip. While the cutoff mark for GATE 2023 was 47.5, in the year 2024 it was only 41 and in 2025 it is 40. The GATE 2025 MT qualifying cutoff marks for the General category can be checked below.
GATE Exam Year | GATE Qualifying Cutoff Marks |
|---|---|
GATE MT 2025 General Category Cutoff | 40 |
GATE MT 2024 General Category Cutoff | 41 |
GATE MT 2023 General Category Cutoff | 47.5 |
GATE MT 2022 General Category Cutoff | 46.2 |
GATE MT 2021 General Category Cutoff | 48.5 |
Quick Links:
| GATE 2025 Paper Analysis | GATE 2025 Answer Key |
|---|
GATE MT 2025 SC/ST Category Qualifying Marks
The GATE MT cutoff scores for SC/ST category have also seen a decline in the past year. The GATE MT 2025 qualifying marks for SC/ST category have dropped to 26.6. From 2021 to 2023, the qualifying marks for the GATE MT exam were between 30 and 32 marks. Check the year-wise GATE MT SC/ST category qualifying cutoff marks below.
GATE Exam Year | GATE Qualifying Cutoff Marks |
|---|---|
GATE MT 2025 SC/ST Category Cutoff | 26.6 |
GATE MT 2024 SC/ST Category Cutoff | 27.3 |
GATE MT 2023 SC/ST Category Cutoff | 31.6 |
GATE MT 2022 SC/ST Category Cutoff | 30.8 |
GATE MT 2021 SC/ST Category Cutoff | 32.3 |
Also Read: GATE Qualifying Marks 2025
GATE MT 2025 EWS/OBC Category Qualifying Marks
Add CollegeDekho as a Trusted Source
Over the years The GATE Metallurgical Engineering cutoff marks have remained consistent between 41 and 44; however, in 2024, the qualifying mark was as low as 36.9 and in 2025 it is 36. Check the table below to know the GATE MT 2025 qualifying cutoff marks for EWS/OBC category.
GATE Exam Year | GATE Qualifying Cutoff Marks |
|---|---|
GATE MT 2025 EWS/OBC Category Cutoff | 36 |
GATE MT 2024 EWS/OBC Category Cutoff | 36.9 |
GATE MT 2023 EWS/OBC Category Cutoff | 42.7 |
GATE MT 2022 EWS/OBC Category Cutoff | 41.5 |
GATE MT 2021 EWS/OBC Category Cutoff | 43. |
Related Articles
| GATE 2025 CS Qualifying Cutoff Marks | GATE 2025 AG Qualifying Cutoff Marks |
|---|---|
| GATE 2025 MA Qualifying Cutoff Marks | GATE 2025 NM Qualifying Cutoff Marks |
Are you feeling lost and unsure about what career path to take after completing 12th standard?
Say goodbye to confusion and hello to a bright future!
FAQs
The GATE 2025 MT qualifying scores have been released.
The GATE MT cutoff scores will be released on the official GATE 2025 exam website, gate2025.iitr.ac.in.
The minimum GATE qualifying score is the GATE 2025 cutoff mark. The GATE cutoff marks will be released by IIT Roorkee along with the GATE 2025 result.
The GATE 2025 participating colleges will be releasing their respecting college cutoff during the admission process. However, the GATE MT qualifying marks are expected to be 44.5, 28.5, and 36.9 for the General, SC/ST, and OBC/EWS categories. Therefore, 40 marks will be good enough for the latter two categories to qualify for the exam.
The category-wise GATE 2023 MT qualifying marks were 47.5, 31.6, and 42.7 for the General, SC/ST, and OBC/EWS categories respectively.
The category-wise GATE 2024 MT qualifying marks were 41, 27.3, and 36.9 for the General, SC/ST, and OBC/EWS categories respectively.
Several factors such as the number of participating applicants in the GATE 2025 Metallurgical Engineering exam, the number of seats available in the participating colleges, the overall difficulty level of the GATE 2025 MT exam, and the previous year's GATE cutoff pattern.
Was this article helpful?
Similar Articles
GATE CS Question Paper Difficulty Level Trends: A detailed analysis
JEE Main 2026 Chemistry High Priority and Low Priority Chapters
Are JEE Main Study Groups Worth It? Detailed Pros and Cons for 2026 Aspirants
How to Prioritize Physics Chapters Based on JEE Main 2026 Weightage and Difficulty
GATE 2026 Mechanical Engineering Expected No. of Questions Topic-Wise
GATE 2026 Civil Engineering Expected No. of Questions Topic-Wise