GATE 2025 Metallurgical Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff

Lipi

Updated On: September 05, 2024 01:15 PM | GATE

GATE 2025 Metallurgical Engineering examination is set to be conducted by IIT Roorkee in online mode. It is expected that the exam for GATE MT 2025 will be held in the month of February 2025. Near about 4000 candidates appear every year for GATE 2025 Metallurgical Engineering.
GATE 2025 Metallurgical Engineering

GATE 2025 Metallurgical Engineering: IIT Roorkee has issued the official notification pertaining to GATE 2025 Metallurgical Engineering exam on its official website. The GATE 2025 Metallurgical Engineering syllabus, as per the official details released, contains a total of 7 sections, namely Engineering Mathematics, Metallurgical Thermodynamics, Transport Phenomena and Rate Processes, Mineral Processing and Extractive Metallurgy, Physical Metallurgy, Mechanical Metallurgy, and Manufacturing Processes. More or less 4000 candidates appear every year for GATE 2025 Metallurgical Engineering. Moreover, along with this, the candidates can also find the details related to the GATE 2025 MT exam pattern on the website.

Moving along, if we talk about the examination of GATE 2025 MT, then the duration of the test will be a total of 3 hours and each question will be of 1 or 2 marks each. During the preparation of the examination, the candidates are advised to take references from the best books of GATE Metallurgical Engineering 2025, such as Manufacturing Processes and Equipment by JT Black, Thermodynamics Databook by J Van Wylen etc. The result of GATE MT will be announced soon after the examination is conducted. The cutoff will then be followed by the release of the result. To get a detailed explanation of GATE 2025 Metallurgical Engineering, go through the complete article below.

Also Check - GATE 2025: Dates (Out), Syllabus, Pattern, Question Papers, Preparation Tips

Quick Links:

GATE 2025 Metallurgical Engineering Exam Dates

The official notification announced on the website holds all the information related to the GATE exam date 2025 . The GATE exam 2025 is scheduled to be conducted on February 1, 2, 15 and 16, 2025. However, IIT Roorkee has yet to announce the exam calendar related to GATE 2025 Metallurgical Engineering. Till then, students can take a look at the tentative date of examination below:-

Event

Date

GATE 2025 Exam Dates

February 1, 2, 15, & 16, 2025

GATE 2025 MT Exam Dates

To Be Announced

Also Check - GATE 2025 Exam Dates (Out): Application Form, Admit Card, Result Date

List of Two Paper Combinations for GATE 2025 Metallurgical Engineering

For GATE 2025, candidates opting for Metallurgical Engineering (MT) have the option to appear in a second paper. One of the combinations is pairing Metallurgical Engineering with Engineering Sciences (XE). An additional application fee will be applicable for the second combination subject.

Total Number of Candidates Appeared for GATE Metallurgical Engineering: Past Trends

The number of candidates registering and appearing for the GATE exam in Metallurgical Engineering (MT) has varied over the past few years. In 2024, 3,858 candidates registered for the MT paper, and 3,111 of them appeared for the exam. While in 2022, there were 4,039 registrations, but only 2,759 candidates appeared for the exam. Check below the past trends of GATE Metallurgical Engineering Exam over the years.

GATE Paper Code

Year

Total No. of Candidates Registered

Total No. of Candidates Appeared

MT

2024

3858 3111

2023

3267 2586

2022

4039 2759

GATE Metallurgical Engineering Qualifying Trends Over the Years

The GATE exam results for Metallurgical Engineering (MT) over the past three years show variations in the number of candidates appearing and qualifying. In 2024, out of 3,111 candidates who appeared for the exam, only 723 qualified. In 2023, the qualifying rate was lower, with 637 out of 2,586 candidates qualifying. Meanwhile, in 2022, 664 candidates qualified out of 2,759. Find below the data that highlights changes in the success rate of candidates across different years.

GATE Paper Code

Year

Total No. of Candidates Appeared

Total No. of Candidates Qualified

Qualifying %

MT

2024

3111 723 23.24%

2023

2586 637 17.74%

2022

2759 664 24.07%

GATE 2025 Metallurgical Engineering (MT) Syllabus

The GATE syllabus 2025 of Metallurgical Engineering has been announced on the website, and according to the same, the syllabus contains a total of 7 sections. Let us dive deep into the GATE MT syllabus 2025 in the table below:-

Name of the Sections

Sub-Sections

Engineering Mathematics

Linear Algebra

Calculus

Vector Calculus

Differential Equations

Probability and Statistics

Numerical Methods

Metallurgical Thermodynamics

Laws of Thermodynamics

Electrochemistry

Transport Phenomena and Rate Processes

Momentum Transfer

Heat transfer

Convection

Radiation

Mass Transfer

Dimensional Analysis

Basic Laws of Chemical Kinetics

Electrochemical Kinetics

Mineral Processing and Extractive Metallurgy

Iron and Steel Making

Primary Steel Making

Secondary Steel Making

Continuous Casting

Physical Metallurgy

Chemical Bonding

X-ray Diffraction

Crystal Imperfections

Diffusion in Solids

Phase Transformation

Solid-state Transformations

Mechanical Metallurgy

Dislocation Theory

Strengthening Mechanisms

Fatigue

Manufacturing Processes

Metal Casting

Hot, Warm and Cold Working of Metals

Metal Joining

Powder Metallurgy

Non-destructive Testing (NDT)

GATE 2025 MT Syllabus PDF

The Indian Institute of Roorkee has released the GATE 2025 syllabus of MT in a PDF format on its website. Moreover, the candidates can find the link to the syllabus pdf below:-

Also Check - GATE 2025 Syllabus: CE, ME, CSE, ECE, EE, Download Subject-Wise Syllabus PDF

GATE 2025 Metallurgical Engineering Exam Pattern

The GATE exam 2025 will have a total of 100 marks and the candidates will be given 180 minutes to take the exam. The GATE exam pattern 2025 of Metallurgical Engineering in detail can be found in the table below:-

Specifications

Details

Exam Mode

Online (Computer Based)

Exam Medium

English

Duration of the exam

3 hours

Types of Questions

  • Multiple Choice Questions (MCQ)

  • Multiple Select Questions (MSQ) and/or

  • Numerical Answer Type (NAT) Questions

Scheme of questions to test ability

  • Recall

  • Comprehension

  • Application

  • Analysis & Synthesis

GATE MT 2025 Marks Distribution

As discussed above, the examination of GATE 2025 MT will be of 100 marks in total. However, the candidates preparing for the test must be well aware of the marks distribution as it will help them in preparing well. Discussing further, the exam of GATE Metallurgical Engineering will be divided into 3 sections, namely General Aptitude, Engineering Mathematics, and Subject Questions. Let us understand better about GATE MT 2025 marks distribution by studying the table below:-

Name of the sections

Marks Distribution

General Aptitude

15 marks

Engineering Mathematics

13 marks

Subject Questions

72 marks

Total Marks

100 marks

GATE 2025 Metallurgical Engineering Marking Scheme

As per the official marking scheme released by IIT Roorkee on its official website, the questions asked in the GATE 2025 Metallurgical Engineering examination will carry 1 and 2 marks. Also, for every wrong answer, the candidate will be awarded a negative mark too. The table below explains the GATE 2025 MT marking scheme:-

Specifications

Details

Marking Scheme

  • 1 and 2 marks for each question

  • No partial marking for MSQs

Negative Marking

  • One negative mark for every wrong answer.

  • ⅓ mark to be deducted for 1 mark MCQ.

  • ⅔ mark to be deducted for a 2-mark MCQ.

  • No negative markings for wrong answers to MSQ/ NAT questions

Also Check - GATE 2025 Paper Codes

GATE 2025 Metallurgical Engineering Question Paper

Solving the previous year question papers of GATE 2025 Metallurgical Engineering will help the candidates to prepare better for the examination. The official pdf links to the GATE previous year question papers have been made available on the official website of IIT Roorkee. However, the candidates can also access the GATE MT question paper PDFs of the previous years from the table below:-

GATE 2025 Metallurgical Engineering Expected Cutoff

The cutoff for GATE 2025 Metallurgical Engineering is decided based on several factors such as the total number of candidates appearing for the examination, the highest marks secured in the exam etc. Moreover, the GATE MT cutoff 2025 holds the marks that the candidates need to secure in order to qualify the exam. Moving along, let us talk about the expected GATE cutoff 2025 for MT in the table below:-

Category

GATE 2025 MT Expected Cutoff

GATE 2024 MT Cutoff

GATE 2023 MT Cutoff

General

44.5

41

-

OBC-NCL/EWS

38.5

36.9

-

SC/ ST/ PwD

28.5

27.3

-

List of IITs Offering Metallurgical Engineering through GATE 2025

There are a number of IITs that offer Metallurgical Engineering. Furthermore, the complete details of the same can be found in the table below:-

List of NITs Offering Metallurgical Engineering through GATE 2025

The candidates can get admission to the following NITs in Metallurgical Engineering after qualifying GATE 2025 examination:-

Related Articles

GATE 2025 Aerospace Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Environmental Science & Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Agricultural Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Architecture and Planning: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Biomedical Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Biotechnology: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Civil Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Chemical Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Computer Science & Information Technology: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Chemistry: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Data Science & Artificial Intelligence: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Electronics & Communication Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Electrical Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Ecology and Evolution: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Geomatics Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Geology & Geophysics: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Instrumentation Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Mathematics: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Mechanical Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Mining Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Physics: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Production & Industrial Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
We hope candidates found this article on GATE 2025 Metallurgical Engineering informative. For the latest updates, stay tuned to CollegeDekho!

Are you feeling lost and unsure about what career path to take after completing 12th standard?

Say goodbye to confusion and hello to a bright future!

news_cta

GATE Previous Year Question Paper

GATE Production and Industrial Engineering (PI) Question Paper 2019

GATE Production and Industrial Engineering (PI) Answerkey 2019

GATE Physics (PH) 2019

GATE Petroleum Engineering (PE) 2019

GATE Petroleum Engineering (PE) Answer key 2019

GATE Mining Engineering (MN) 2019

GATE Metallurgical Engineering (MT) Answer key 2019

GATE Mechanical Engineering (ME1) 2019

GATE Mechanical Engineering (ME02) Question Paper 2019

GATE Mechanical Engineering (ME02) Answer key 2019

GATE Mathematics (MA) Answer key 2019

GATE Mathematics (MA) Answer key 2019

GATE Life Sciences (XL-P, Q, R, S, T, U) Question Paper 2019

GATE Instrumentation Engineering (IN) 2019

GATE Instrumentation Engineering (IN) Answer key 2019

GATE Geology and Geophysics (GG) Question Paper 2019

GATE Engineering Sciences (XE-A, B, C, D, E, F, G, H) 2019

GATE Engineering Sciences (XE-A, B, C, D, E, F, G, H) Answer keys 2019

GATE Electronics and Communication Engineering (EC) 2019

GATE Electronics and Communication Engineering (EC) Answer key 2019

Electrical Engineering 2019

Gate Electrical Engg. Answerkey 2019

GATE Ecology and Evolution (EY) 2019

GATE Ecology and Evolution (EY) Answer key 2019

GATE Computer Science and Information Technology (CS) 2019

GATE Computer Science and Information Technology (CS) Answer key 2019

GATE Civil Engineering (CE1) 2019

GATE Civil Engineering (CE1) Answer key 2019

GATE Civil Engineering (CE2) 2019

GATE Chemistry (CY) 2019

GATE Chemistry (CY) Answer key 2019

GATE Chemical Engineering (CH) 2019

GATE Chemical Engineering (CH) Answer key 2019

GATE Biotechnology (BT) 2019

GATE Biotechnology (BT) Answerkey 2019

GATE Architecture and Planning (AR)2019

GATE Architecture and Planning (AR) Answer key 2019

GATE Agricultural Engineering (AG) 2019

GATE Agricultural Engineering (AG) Answer key 2018

GATE Agricultural Engineering (AG) Answer key 2019

GATE Aerospace Engineering (AE) 2019

GATE Aerospace Engineering (AE) Answer key 2019

GATE 2017 AE Question Paper

GTE IN 2017 question paper

GATE IN 2017 Question Paper

/articles/gate-2025-metallurgical-engineering-exam-date-syllabus-question-papers-pattern-cutoff/
View All Questions

Related Questions

I got 630 rank in tspgecet in civil engineering. I am a BC-B category person. Will i get a seat in university. If yes, What universities will be best for M.Tech seat for structural engineering? Please suggest me an option...!

-AbhishekUpdated on September 27, 2024 11:39 AM
  • 2 Answers
harshit, Student / Alumni

Hi there, LPU offers several M Tech programs. You can visit website for details or reach out to KPU Officials. LPU has NAAC A ++ accreditation. GOod Luck

READ MORE...

When the admission for m arch opens

-abishekUpdated on September 25, 2024 07:09 PM
  • 1 Answer
Rupsa, Content Team

Dear Student,

Admission to M.Arch courses at College of Engineering, Trivandrum (CET) usually begins in March, following the release of the GATE results. For the academic year 2024, M.Arch admission at College of Engineering Trivandrum is over. However, spot admissions are still ongoing, so you can check out the college website for registration details.

There are two specializations for the Master of Architecture degree: M.Arch (Urban Design), and M.Arch (Environmental Design). If you wish to take admission for the academic year 2025, you must apply and qualify the GATE exam, which is scheduled in February 2025. However, you may also …

READ MORE...

Can Computer science student can eligible for NPTI course?

-ritika ledangeUpdated on October 07, 2024 06:10 PM
  • 1 Answer
Rupsa, Content Team

Dear Student,

If you have studied B.Tech in Computer Science Engineering at the graduate level, then you are eligible to apply for admission at the National Power Training Institute (NPTI) in Nagpur. While NPTI mainly focuses on training in the power and energy sector, some courses are related to areas like IT, automation, and management. These areas may have relevance to Computer Science students, especially those interested in fields like data management for power plants and automation and control systems. For example, there is a course at NPTI that involves smart grid technology or IT solutions for the power sector. …

READ MORE...

Do you have a question? Ask us.

  • Typical response between 24-48 hours

  • Get personalized response

  • Free of Cost

  • Access to community

Recent Articles

Recent News

Subscribe to CollegeDekho News

By proceeding ahead you expressly agree to the CollegeDekho terms of use and privacy policy

Top 10 Engineering Colleges in India

View All
Top