Become Job Ready with CollegeDekho Assured Program
Learn More

DTE Maharashtra Polytechnic Option Form 2022 Round 2(Out): Dates, CAP Choice Filling Process

Falak Khan
Falak KhanUpdated On: September 02, 2022 11:41 am IST

DTE Maharashtra DSD CAP round 2 option form has been released on 2nd September 2022. Get option form dates for all 3 rounds here.

DTE Maharashtra Polytechnic Option Form 2022

DTE Maharashtra Polytechnic Option Form 2022: The Directorate of Technical Education (DTE) Maharashtra has released the CAP Round 2 option form on September 2, 2022. Candidates can fill out the choice or preference of colleges and courses as per the vacant seats. Candidates are advised to check the seat vacancy before filling the DTE Maharahtra polytechnic option form. The last date to fill the Polytechnic CAP Round 2 Option Form is September 4, 2022. Candidates must fill their options before the last date to be considered for seat allotment. 

The DTE has released the DTE Maharashtra Polytechnic Option Form 2022 dates for all 3 rounds. Candidates must fill out and confirm an online option form with the course and institution preferences prior to the respective CAP Rounds. Candidates may enter their preferences for Institutes and courses in the order specified by the Competent Authority. Once confirmed, the  DTE Maharashtra Polytechnic option form is considered for allotment in the respective CAP Rounds. 

Earlier, it has released the final merit list for Maharashtra DTE Polytechnic Admission 2022 on August 18, 2022. Now, for candidates who want to participate in the Common Admission Process (CAP), it is mandatory to fill out the Online Option Form for the respective CAP Round. The CAP admission is done in 3 rounds and for each round candidates are required to fill out the online option form.

Read the full article to get details about DTE Maharashtra Polytechnic Option Form 2022 dates, steps to fill, important guidelines to be followed and more. 

DTE Maharashtra Polytechnic Option Form 2022 Dates 

The Directorate of Technical Education (DTE) Maharashtra has released the official schedule for option form. Candidates can check the DTE Maharashtra option form dates 2022 given below. 

Event

Dates

Declaration of DTE Maharashtra Final Merit List 2022

August 18, 2022

Display of Provisional Category wise Seats (Seat Matrix) for CAP Round I

August 19, 2022

Online Submission & Confirmation of Option Form of CAP Round-IAugust 20, 2022

CAP Round 1 Option Form Closing Date

August 23, 2022

Display of Provisional Allotment of CAP Round-I

August 25, 2022

Display of Provisional Vacant Seats for CAP Round-II

August 31, 2022

Online Submission & Confirmation of Option Form of CAP Round- II through candidate’s Login by the Candidate

September 1 to September 4, 2022

Display of Provisional Allotment of CAP Round-II

September 6, 2022

Display of Provisional Vacant Seats for CAP Round-III

September 12, 2022

Display of provisional Allotment of CAP Round-III

September 17, 2022

Cut-off Date for all type of admissions for the Academic Year 2022-23

September 29, 2022

Quick Link: DTE Maharashtra Polytechnic Merit List 2022

How to fill DTE Maharashtra Option Form 2022?

Check the step-by-step instructions to fill the DTE Maharashtra option form 2022 given below. 

Steps 

Instructions 

Step 1

Click on the direct link to log in given above to log in with their Application ID and Password.

Step 2

The option form will be displayed, and candidates must select colleges and courses as well as a priority number (1, 2, 3, 4...).

Step 3

After you have filled out the options, click 'Confirm' to save and lock them. Candidates cannot change their choices once they have confirmed them.

Step 4

Re-enter the Application ID and Password for the final option submission, then log out.

Quick Link: List of best polytechnic course in India

Guidelines regarding DTE Maharashtra Option Form 2022

While filling out the option form of DTE Maharashtra Polytechnic admissions candidates should remember the following guidelines and not make any mistakes. 

  • Candidates can access the online option form through their login credentials 

  • All candidates must confirm the online option form (after confirming the option form, the candidate will not be able to change the options)

  • To avoid impersonation, candidates should not reveal their Application ID and Password to others

  • Candidates are advised to change their passwords on a regular basis and to keep a record of them in a secure location

  • In the option form, the serial number of the block indicates the preference of choice. As a result, the candidate's choice code for the institute in block No. 1 will be considered first preference (Highest Priority Choice)

  • Only option forms submitted online will be considered for further processing

  • The candidate must confirm the online Option Form submission by reentering the Application ID and Password. The candidate may print a copy of the confirmed Option form for his or her records and future reference

  • The candidate can select minimum 1 and maximum 300 options. In the online option form, the candidate must enter the institute choice code against the option number

Quick Link: Diploma in Polytechnic Engineering 

DTE Maharashtra Polytechnic CAP Round 1

The seats available for Round I are published on the website. Candidates whose names appear on the CAP's final merit list are eligible to participate in this round by completing an online option form. The candidate must fill out and confirm the option form using the candidate's login.

NOTE: After confirmation of Option form, the candidate will not be able to change the Options

DTE Maharashtra Polytechnic CAP Round 2

Seats for Rounds II and III will be made available on the website. Candidates eligible for rounds II and III may fill out and/or edit the online option form completed by the previous round's candidate. The seats that will be allotted during these rounds will be available to eligible candidates who fall into the following categories. -

  • Candidates who have been allocated a seat other than their first preference and accepted the seat in clause shall be eligible for participation in the subsequent rounds for advancement

  • Candidates who have been allocated a seat other than their first preference but have not accepted the seat shall be eligible for participation in the subsequent rounds

  • Candidates who were not assigned a seat in any of the previous rounds

  • Candidates who did not participate (failure to complete the option form) in the previous round


Also read:DTE Maharashtra DSD CAP Round 2 Option Form 2022 Released: Direct Link, Last Date, Instructions

Related Links:

Besides DTE Maharashtra Polytechnic Admission other states of India also conducts the polytechnic admission to select qualified candidates for various polytechnic courses available. You can click on the link below to get details about other states polytechnic admissions

We hope that this article on DTE Maharashtra Polytechnic Option Form 2022 was helpful and informative. For more information stay tuned to CollegeDekho. 

/articles/dte-maharashtra-polytechnic-option-form/

Be the First to Know

Get Access to Latest Updates

View All Questions

Related Questions

What is the Admission 2020 date of Government Polytechnic, Sirsa?

-amitUpdated on September 21, 2022 02:03 PM
  • 2 Answers
Diksha Sharma, Student / Alumni

Dear Student,

The official admission dates for admission to Government Polytechnic, Sirsa have not been released and you are advised to stay tuned with College Dekho and the official website for the notification of admission.

Until you are waiting for the admission, do not miss out on the Polytechnic Entrance Exams which you can apply for admission to the Polytechnic course.

You can also check the List of Polytechnic (Diploma) Courses in India in 2020 to learn about the different streams and their overview.

Also, do not miss out on the Best Career Options after Polytechnic to get an idea …

READ MORE...

I got 47% in 10th. Can I get admission in Mechanical Engineering Diploma?

-Param patilUpdated on September 17, 2022 10:20 AM
  • 7 Answers
Diksha Sharma, Student / Alumni

Dear Student,

You need to score at least 60℅ in your 10th to be eligible for the Diploma in Mechanical Engineering course at Government Polytechnic, Nashik. Hence, it is advisable for you to pass your 12th before applying for admission.

Meanwhile, you can check the other Polytechnic Entrance Exams which you can apply for admission to the Polytechnic course.

When it comes to Polytechnic, there are various streams from which you can choose. If you are confused about which course to choose, you can check the List of Polytechnic (Diploma) Courses in India.

For more insights, you can …

READ MORE...

When will the Diploma Chemical Engineering Admission start?

-ANIRUDDh sinh sindhaUpdated on September 15, 2022 03:46 PM
  • 7 Answers
Diksha Sharma, Student / Alumni

Dear Student,

The online admission process for Shri K. J. Polytechnic (SKJPC), Bharuch has not started yet and the official dates will be updated by College Dekho as soon as notification is out. There is no test and the admission is done on the basis of merit in the qualifying exam.

Meanwhile, you can check the other Polytechnic Entrance Exams which you can apply for admission to the Polytechnic course.

When it comes to Polytechnic, there are various streams from which you can choose. If you are confused about which course to choose, you can check the List of Polytechnic …

READ MORE...

Do you have a question? Ask us.

  • Typical response between 24-48 hours

  • Get personalized response

  • Free of Cost

  • Access to community

Subscribe to CollegeDekho News

By proceeding ahead you expressly agree to the CollegeDekho terms of use and privacy policy
Apply Now

Top 10 Engineering Colleges in India

View All

Join us and get exclusive education updates!

Top