Pay your college fees in 6 easy installments at 0% interest
Learn More

B.Tech Plastic Engineering (B.Tech Plastic Engineering)

Updated By Diksha Sharma on 25 Nov, 2020
Average Duration
4 years
Average Fee
40 K-1.5 L INR annual
Exams Accepted
CUCET, MDU CEE, DUET ...

About B.Tech Plastic Engineering

B. Tech Plastic Engineering is an undergraduate program which is of a total of 4 years duration, divided into 8 semesters. The candidates who have passed 12th or any equivalent degree in any Science stream can pursue a course in B. Tech Plastic Engineering. Through this course, the students are provided with a curriculum of the specialised concept of Plastic Engineering with in-depth theoretical and practical knowledge of plastic designing and management concepts. The various areas of concepts which are covered by B. Tech in Plastic Engineering course include the practice of plastic processing, plastic and synthetic materials manufacturing, plastic storage science, development of Synthetic Materials, etc.

The selection of candidates for admission to B. Tech Plastic Engineering course is done either through direct admission or through a national level entrance exam such as JEE Mains. The average course fee for B. Tech Plastic Engineering ranges somewhere in between 50K to 2 lakh depending on the type of Institute. 

B.Tech Plastic Engineering Eligibility Criteria

The candidates who wish to pursue a degree in B. Tech Plastic Engineering must fulfil certain eligibility criteria in order to get eligible for the course. Though the eligibility criteria for admission to B. Tech Plastic Engineering differs from college to college, there are certain minimum eligibility criteria which the candidates must fulfil for admission.

The eligibility criteria required for admission to B. Tech Plastic Engineering are given below:

  • The candidates must have passed 12th or an equivalent degree from a recognised institute/board.

  • The candidate must have opted for Mathematics and Physics as the major subjects in class 12th along with one of the optional subjects as Chemistry/ Biology/ Biotechnology.

  • The candidate must have acquired a minimum aggregate of 60% (55% for the reserved candidates) in the qualifying examination. 

  • The candidates who are appearing for the final exam or waiting for the final result can also apply for admission to B. Tech Plastic Engineering g course.

B.Tech Plastic Engineering Syllabus

The semester wise syllabus for B. Tech Plastic Engineering program has been given in the table below:

Semester I

Semester II

Technical English 1

Electricals and electronics engineering

Engineering Physics 1

Technical English 2

Engineering Chemistry 1

Engineering Mechanics

Mathematics 1

Engineering Physics 2

Engineering Graphics

Engineering Chemistry 2

Computer Programming

Mathematics 2

Practical

Workshop

Semester III

Semester IV

Mathematics in differential equation

Polyurethane Technology

Material engineering

Adhesive and surface coating

Environmental science

Polymer nanocomposites

Organic chemistry

Techniques for statistics quality

Material and their strength

Biomedical plastic

Semester V

Semester VI

Mathematics in probability

Physical property of polymers

Mould  manufacturing

Polymer rheology

Structure, property and relationship of polymer

Polymerization

Chemical engineering

Application of plastic materials

Semester VII

Semester VIII

Open Elective II

Open Elective IV

Open Elective III

Open Elective V

Fundamentals of tile design

Practical 

Rubber Technology

Plastic processing Technology

Practical

Internship

Want to know more about

B.Tech Plastic Engineering?

B.Tech Plastic Engineering Career Options and Job Prospects

After completing a course in B. Tech Plastic Engineering,  the candidates can opt for various career opportunities and job prospects. The candidates who have pursued a degree in B. Tech Plastic Engineering can go for either a government-based or a private based industry. The various job options which the candidates can take after pursuing a degree in B. Tech Plastic Engineering includes Plastic Engineer, Plastic Testing Manager, Design Technician, Mould Maker, Storage Manager, Mould Designer, etc. The starting salary of a candidate for B. Tech Plastic Engineering ranges in between INR 5 to 7 LPA. 

B.Tech Plastic Engineering Admission Process

While some colleges offer admission to B. Tech Plastic Engineering program on the basis of merit obtained by the student in JEE Main, some of the colleges also conduct their own entrance exam for testing the eligibility of students for admission. Based on the merit obtained by the student in the qualifying exam or an entrance exam, the shortlisted candidates are called for the university level test in which their proficiency in terms of 12th level Science, Mathematics Concept, Aptitude and Reasoning are evaluated. Based on the performance of the student in the entrance exam, the qualified candidates are further called for the personal interview round conducted by the colleges. Based on the overall marks obtained by the student in the entrance exam and the interview round, the eligible candidates are offered admission to the program. 

B. Tech Plastic Engineering Course Fees

The course fee for B. Tech Plastic Engineering depends on various factors such as the type of the institute,  the popularity/ ranking of the institute, and the merit/ scholarship earned by the student. For instance, the student having higher marks in the entrance exam will be provided with a higher scholarship, accounting for a lower course fee as compared to students with direct admission. On the other hand, government-based institutes will have much lower fees as compared to private institutes. On average, the course fee for B. Tech Plastic Engineering program ranges somewhere between INR 50k to 2 lakh.

B.Tech Plastic Engineering Cutoff

Colleges for 50-60 PercentileList of Colleges for 50-60 Percentile in JEE Main
Colleges for 75,000 to 1,00,000 RankList of Colleges for 75,000 to 1,00,000 Rank in JEE Main
Colleges for 70-80 PercentileList of Colleges for 70-80 Percentile in JEE Main
Colleges for 50,000 to 75,000 RankColleges for 50,000 to 75,000 Rank in JEE Main
Colleges for 60-70 PercentileList of Colleges for 60-70 Percentile in JEE Main
Colleges for 25,000 to 50,000 RankList of Colleges for 25,000 to 50,000 Rank in JEE Main
Colleges for 80-90 PercentileList of Colleges for 80-90 Percentile in JEE Main
Colleges for 10,000 to 25,000 RankList of Colleges for 10,000 to 25,000 Rank in JEE Main

B.Tech Admission Process Across the States

Kerala

Kerala B.Tech Admission

Telangana

Telangana B.Tech Admission

Andhra Pradesh

Andhra Pradesh B.Tech Admission

Karnataka

Karnataka B.Tech Admission

Delhi

Delhi B.Tech Admission

West Bengal

West Bengal B.Tech Admission

Haryana

Haryana B.Tech Admission

Jharkhand

Jharkhand B.Tech Admission

B.Tech Centralised Admission Process

Admission Process

Conducting Authority

Tamil Nadu Engineering Admissions (TNEA)

Anna University, Tamil Nadu

Rajasthan Engineering Admission Process (REAP)

Rajasthan Technical University

Punjab B.Tech AdmissionsGovernment of Punjab/ Punjab Technical University

Madhya Pradesh B.Tech Admissions

Government of Madhya Pradesh

B. Tech Plastic Engineering Course Highlights

The major highlights of the B. Tech Plastic Engineering course are given in the table below:

Level

Undergraduate

Duration

4 years (8 semesters)

Fee Structure

INR 50K- 2 lakh

Exam Type

Per Semester

Eligibility 

Must be passed in 12th PCM/PCB from a recognised Board

Minimum Aggregate Required

50%

Admission Process

Merit-Based, Entrance Exam

Starting Salary

INR 5 to 7 LPA

Job Options

Plastic Engineer, Plastic Testing Manager, Design Technician, Mould Maker, Storage Manager, Mould Designer, etc.

Questions Related to B.Tech Plastic Engineering Course

How is Lovely Professional University for Engineering (B.Tech/ B.E)?

-AshishUpdated on July 23, 2021 03:49 PM
  • 67 Answers
Sukriti Vajpayee, CollegeDekho Expert

Dear student,

The engineering courses offered at LPU are provided under the degree of B.Tech (Bachelor of Technology). B ...

READ MORE...

Which entrance exam score is accepted for B.Tech Dairy Technology admission at Sheth MC College of Dairy Science, Gujarat? What is the eligibility criteria for B.Tech DT admission?

-Meet PatelUpdated on July 22, 2021 06:17 PM
  • 2 Answers
Abhik Das, Student / Alumni

Dear student, Sheth MC College of Dairy Science, Anand, Gujarat accepts the GUJCET exam score for B.Tech Dairy Technology ...

READ MORE...

I had PCB subject group in class XII. Can I apply for B.Tech Dairy Technology admission?

-DhruviUpdated on June 30, 2021 04:53 PM
  • 1 Answer
Abhik Das, Student / Alumni

Dear student, to be eligible for B.Tech dairy technology admission, it is mandatory you must have studied Physics, Chemistry ...

READ MORE...

Still have questions about B.Tech Plastic Engineering

  • Typical response between 24-48 hours

  • Get personalized response

  • Free of Cost

  • Access to community

FAQs about B.Tech Plastic Engineering

I want admission in B.Tech Plastic Engineering. Do I have to clear any exams for that ?

Symbiosis Entrance Test , Kalinga Institute of Industrial Technology Engineering Entrance Exam , Cochin University of Science and Technology Common Admission Test , SRM Joint Engineering Entrance Examination , Kerala Engineering, Architecture and Medical Entrance Exam are some of the exams that you can appear for to get admission in B.Tech Plastic Engineering courses.

What are the top colleges offering B.Tech Plastic Engineering courses ?

Following are some of the top colleges offering Engineering courses : Indian Institute of Technology (Chennai) , Birla Institute of Technology and Science (Pilani) , Institute of Chemical Technology (Mumbai) , Indian Institute of Technology (Mumbai) , National Institute of Technology (Warangal). You can explore these colleges on our website to check if they offer B.Tech Plastic Engineering or not.

What is the average fee for the course B.Tech Plastic Engineering ?

The average fee for B.Tech Plastic Engineering is INR 50K-2 Lakh per year.

What are the popular specializations related to B.Tech Plastic Engineering ?

Some of the popular specializations for B.Tech. (Bachelor of Technology) are : Poultry Production Technology , Industrial Management , Mineral Engineering , Electrical and Communication , Heat Power Engineering.

What is the duration of the course B.Tech Plastic Engineering ?

B.Tech Plastic Engineering is a 4 year course.

Get details of best colleges for B.Tech Plastic Engineering.

Top